Manual Shoprider W12 (page 10 of 24) (English)

600326

Zoom out

Zoom in

1/24

~10~

JOYSTICK CONVERSION (right to left or left to right)

Loosen the hand knob [Fig.2 (3)] and remove the entire armrest assembly with the

joystick attached. Place the armrest assembly on the desired side. Reset in position

by re-tightening the hand knobs to complete joystick conversion.

SEAT HEIGHT ADJUSTMENTS (Fig.4)

Disconnect the power cord coming from the joystick/controller at the back of the

Powerchair by pressing on the latch with your left hand and firmly pulling the cable

plug with your right hand. Remove the seat by releasing the tightening lever. The seat

supporting post under the seat has two height adjustment holes. The height of the

seat can be adjusted by tightening the Hex Head Bolt and Nyloc Nut in any one of the

two holes. This also secures the seat supporting post to the power base. Make sure

that all connections are tightened before operating the Powerchair.

ADJUSTMENT PROCEDURES

Fig. 4

Hex Head Bolt

Tightening Lever

Seat Supporting Post

Nyloc Nut

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Shoprider W12 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Shoprider W12 Manual

Product: