Manual Sherwood R-904N NetBoxx (page 24 of 63) (English)

459227

Zoom out

Zoom in

1/63

ENGLISH

• Each time these buttons are pressed, the parameter mode

changes as follows :

→“EQ” ↔ “L.SYNC” ↔ “DM”↔ “DRC” ↔ “LFE” ↔ “HDMI” ←

(Room EQ) (Lip-Sync) (Dual Mono) (Dynamic (LFE level) (HDMI Audio Out)

ange Control)

→“D.VOL” ↔ “PNRM” ↔ “DIMEN” ↔ “C.WIDTH” ↔ “A.DLY” ←

(Dolby Volume) (Panorama) (Dimension) (Center Width) (Auto Delay)

2. Press the CURSOR UP/DOWN buttons to select the desired parameter.

3. Press the CURSOR LEFT/RIGHT buttons to adjust the selected parameter as desired.

■Notes:

• To set the “EQ” to “ON”, perform the ROOM EQ setup first. (For details, refer to “SETTING THE ROOM EQ” on page 49.)

• “C.WIDTH”, “DIMEN” and “PNRM” can be selected only while listening in Dolby Pro Logic II Music or Dolby Pro Logic IIx

Music mode.

• Some parameters such as “DRC”, etc. may not be selected depending on the surround mode or program source, etc.

■When selecting the “EQ (Room EQ)”

• The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your room measured

by the ROOM EQ setup, the room EQ automatically adjusts the frequency response of your speakers.

• If you use different brands or sizes of speakers for some channels or have a room with unique acoustic characteristics, such

as walls, furniture, and the dimensions or the shape of the room, we recommend using the room EQ.

OFF : To turn off the room EQ.

↕

ON : To adjust the frequency response of all speakers to the flattest response.

■When selecting the “L.SYNC (Lip-Sync)”

• There may be a slight time delay between the video and audio signals in case that some video playback equipments may

process the video signals later than the audio signals due to signal processing procedure, etc.. Should this happen, you can

adjust the time delay of audio signals to synchronize the sound with the picture.

• The time delay can be adjusted with the range of 0.0 ~ 9.0 frames (1 sec. = 30 frames).

■When selecting the “DM (Dual Mono)”

• Dual mono software usually is used to put two different mono soundtracks, that you can listen to together or separately, on

one DVD, etc. With this setting you can choose which dual mono setting you want to listen to.

• This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.

→ CH 1 : Only channel 1 is heard from the front speakers.

↕

CH 2 : Only channel 2 is heard.

↕

→ CH 1+2 : Both channels are heard.

R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 24

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood R-904N NetBoxx in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sherwood R-904N NetBoxx Manual

Product: