469881
75
Zoom out
Zoom in
Previous page
1/81
Next page
Appendix
-73
Problem Check Page
The cooling fan
becomes noisy.
When temperature inside the projector increases, the cooling fan runs
faster.
The lamp does not light up
even after the
projector turns on.
The lamp indicator is illuminating in red.
Replace the lamp.
The lens shutter is opened fully.
23, 60, 63
The lamp suddenly turns off
during projection.
The image sometimes
ickers.
Cables are incorrectly connected to the projector or the connected equip-
ment works improperly.
If this happens frequently, replace the lamp.
19-22
63
The lamp needs much time
to turn on.
The lamp will eventually need to be changed.
While the remaining lamp life draws to a close, replace the lamp.
63
Picture is dark.
One Touch Play is not
enabled.
Non-Sharp Video Products are connected.
One Touch Play function may not work when the projector is connected
to non-Sharp Video Products.
46
An HDMI cable is not used for connection between the projector and the
Sharp Video Products.
One Touch Play function is enabled when the projector is connected to
the Sharp Video Products with an HDMI cable.
20
One Touch Play function of the projector is not set to “On”. 46
CEC settings of connected Sharp Video Products or other CEC devices
are incorrect.
One Touch Play is set to “Off” and disabled when the Economy mode is
set to “On”.
46
System Standby is not
enabled.
Non-Sharp Video Products are connected.
System Standby function may not work when the projector is connected
to non-Sharp Video Products.
46
An HDMI cable is not used for connection between the projector and the
Sharp Video Products.
System Standby function is enabled when the projector is connected to
the Sharp Video Products with an HDMI cable.
20
System Standby function of the projector is not set to “On”. 46
CEC settings of connected Sharp Video Products or other CEC devices
are incorrect.
A response code cannot be
received when the
projector was attempted
to be controlled using
RS-232C commands from
a computer during standby.
In the case of transmitting RS-232C commands from a computer during
standby, it takes a maximum of 30 seconds for the computer to receive
the response code. Set the response code waiting time of the computer
to 30 seconds or more.
66
The remote control
cannot be used.
Operate the remote control while pointing it at the projector’s remote
control sensor.
The remote control may be too far away from the projector.
If direct sunlight or a strong fl uorescent light is shining on the projector’s
remote control sensor, place the projector where it will not be affected by
strong light.
13
13
13
The batteries may be depleted or inserted incorrectly. Make sure the bat-
teries are inserted correctly or insert new ones.
13
XV-Z17000_E_US.indb 73XV-Z17000_E_US.indb 73 2010/12/17 11:16:502010/12/17 11:16:50
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XV-Z17000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XV-Z17000 in the language / languages: English as an attachment in your email.

The manual is 11,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp XV-Z17000

Sharp XV-Z17000 User Manual - German - 80 pages

Sharp XV-Z17000 User Manual - Dutch - 80 pages

Sharp XV-Z17000 User Manual - French - 80 pages

Sharp XV-Z17000 User Manual - Italian - 80 pages

Sharp XV-Z17000 User Manual - Swedish - 80 pages

Sharp XV-Z17000 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info