469881
74
Zoom out
Zoom in
Previous page
1/81
Next page
Troubleshooting
Problem Check Page
No picture or projector does
not start
Projector power cord is not plugged into the wall outlet. 23
Power to the external connected devices is off.
The lens shutter is closed. 23, 28
The selected input mode is wrong. 27, 41, 42
Cables are incorrectly connected to the projector. 19-23
Remote control battery has run out. 13
External output has not been set when connecting notebook computer.
The lamp unit cover is not installed correctly. 63, 64
The selected “Signal Type” is wrong. 41
The video signal format of the video equipment is not set correctly.
42
“Bright” is set to minimum position. 37
Color is faded or poor.
Image adjustments are incorrectly set. 37
(S-VIDEO or VIDEO input)
Video input system is incorrectly set.
(COMPONENT, COMPUTER/COMPONENT or HDMI1, 2 input)
Input signal type is incorrectly set.
42
41
Picture is blurred;
noise appears.
Adjust the focus. 24
The projection distance exceeds the focus range. 18
(Computer input)
Perform “SIG-ADJ” Adjustments (“Clock” Adjustment)
Perform “SIG-ADJ” Adjustments (“Phase” Adjustment)
Noise may appear depending on the computer.
41
41
The “DNR” (Digital Noise Reduction) or “MNR” (Mosquito Noise Reduc-
tion) setting is not correct.
40
There is fog on the lens. If the projector is carried from a cold room into a
warm room, or if it is suddenly heated, condensation may form on the surface
of the lens and the image will become blurred. Please set up the projector at
least one hour before it is to be used. If condensation should form, remove the
power cord from the wall outlet and wait for it to clear.
An unusual sound is
occasionally heard
from the cabinet.
If the picture is normal, the sound is due to cabinet shrinkage caused
by a room temperature changes. This will not affect operation or perfor-
mance.
Maintenance
indicator on the
projector illuminates.
See “Maintenance Indicators”. 60
Picture is green when
receiving YPbPr
signals and the video
equipment is connected
to the COMPONENT or
COMPUTER/COMPONENT
terminal on the projector.
Change the input signal type setting. 41
Picture is pink when receiv-
ing RGB signals and the video
equipment is connected to the
COMPONENT or COMPUTER/
COMPONENT terminal on the
projector.
The black levels of the
image show banding or
appear faded when HDMI1
or 2 is selected.
Make adjustments that result in the best picture quality in the “Dynamic
Range” setting.
42
Picture is too bright and
whitish.
Image adjustments are incorrectly set. 37
-72
XV-Z17000_E_US.indb 72XV-Z17000_E_US.indb 72 2010/12/17 11:16:502010/12/17 11:16:50
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XV-Z17000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XV-Z17000 in the language / languages: English as an attachment in your email.

The manual is 11,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp XV-Z17000

Sharp XV-Z17000 User Manual - German - 80 pages

Sharp XV-Z17000 User Manual - Dutch - 80 pages

Sharp XV-Z17000 User Manual - French - 80 pages

Sharp XV-Z17000 User Manual - Italian - 80 pages

Sharp XV-Z17000 User Manual - Swedish - 80 pages

Sharp XV-Z17000 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info