469885
81
Zoom out
Zoom in
Previous page
1/86
Next page
Appendix
-79
Troubleshooting
Check
Projector power cord is not plugged into the wall outlet.
Power to the external connected devices is off.
The selected input mode is wrong.
Cables are incorrectly connected to the projector.
Remote control batteries have run out.
External output has not been set when connecting notebook computer.
When the connected DVI digital equipment is turned on before the
“DVI” input mode is selected on the projector, the image may not be
projected properly or may not be displayed at all. Ensure that the
appropriate input mode has been selected and set the input signal type
on the projector before you turn on the connected equipment.
Is the lens cover correctly attached?
Is the filter cover correctly attached?
Is the lamp unit cover correctly attached?
Cables are incorrectly connected to the projector.
“Bright” is set to minimum position.
The “Shutter” is closed.
Image adjustments are incorrectly set.
(COMPUTER 1/2, DVI, HDMI only)
Input signal type (RGB/Component) is incorrectly set.
(VIDEO, S-VIDEO only)
Video Input system is incorrectly set.
Adjust the focus.
The projection distance exceeds the focus range.
When an optional lens is attached, refer to the operation
manual of the lens.
There is fog on the lens. If the projector is carried from a cold
room into a warm room, or if it is suddenly heated, condensation
may form on the surface of the lens and the image will become
blurred. Please set up the projector at least one hour before it is
to be used. If condensation should form, remove the power cord
from the wall outlet and wait for it to clear.
(Computer Input only)
Perform “Fine Sync” Adjustments. (“Clock” Adjustment)
Perform “Fine Sync” Adjustments. (“Phase” Adjustment)
Turn off the LCD display of the notebook computer.
Noise may appear depending on the computer.
The “DNR” (Digital Noise Reduction) setting is not correct.
Cables are incorrectly connected to the projector.
Volume is set to minimum.
The “MUTE” function is working.
The “Speaker” menu is set to “Off”.
Problem Page
28
36
2427
16
24
78
68
73
2427
49
41
49
51
57
31
22
53
53
76
50
2427
36
37
55
Sound is heard but no
picture appears.
Color is faded or poor.
Picture is blurred;
noise appears.
Picture appears but no
sound is heard.
No picture and no sound
or projector does not start.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XG-P610X-N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XG-P610X-N in the language / languages: English as an attachment in your email.

The manual is 7,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp XG-P610X-N

Sharp XG-P610X-N Quick start guide - English - 59 pages

Sharp XG-P610X-N User Manual - Dutch - 86 pages

Sharp XG-P610X-N User Manual - Dutch - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info