787872
12
Zoom out
Zoom in
Previous page
1/92
Next page
10
To drain water from the bottom drainage port when the display shows
H8.
Drainage method
1 Drain water from the bottom drainage port.
Turn o the unit and pull out the plug from the socket.
Place a water container under the bottom drainage port, or move the
machine to a place where it can drain.
Remove the rubber plug of the bottom drainage port to drain water.
After draining, insert the rubber plug.
Press ON/OFF button to restart.
2 Drain water from the middle drainage port.
NOTE
Water can be autamatically emptied into a oor drain by attaching
13mm inner diameter hose (not included).
1. Remove the continuous drain cap by turning it counter clockwise then
remove the rubber stopper from the spout.
2. Insert a 13 mm inner diameter hose (not included) onto drain
connector.
ATTENTION:
When using continuous drainage option from the middle hole, place
the unit on a level surface and make sure drainage hose is clear of any
obstructions and is directed downward. Placing the unit on an uneven
surface or improper hose installation may result in water lling up the
chassis and causing the unit to shut o. Empty water in the chassis if
shut o occurs, then check the unit location and hose for proper setup.
Installing Heat Discharge Pipe
Install heat discharge pipe
1. Rotate joint A and Rear clip clockwise into the two ends of heat
discharge pipe.
2. Insert joint A of heat discharge pipe into the groove until you hear a
clicking sound.
clasp
groove
3. Lead the heat discharge pipe outdoors.
Note on installing heat discharge pipe
In order to improve cooling eciency, the heat discharge pipe should be as
short as possible and at without curve to ensure smooth heat discharge.
The discharge pipe is suggested to be installed according to below gure .
Discharge pipe can be installed based on user's requirement, while
installation form as shown below should be avoided as it may lead to
non-uniform exhaust.
If the length of the heat discharge pipe is less than 1 meter. It is
recommended to use it with shortest length.
When installing, heat discharge pipe should be as at as possible. Do not
lengthen the pipe or connect it with an other heat discharge pipe.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp UL-C09EA-W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UL-C09EA-W in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 30.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info