13339
59
Zoom out
Zoom in
Previous page
1/63
Next page
E58
TV care
Troubleshooting
If you think the TV may be faulty, please check the following points before taking it to be repaired.
If afterwards it still does not work, please contact the shop where you purchased the TV or your nearest
Sharp authorized Service Center.
The TV's fluorescent tubes have a limited life span.
- If the screen darkens, persistently flickers or does not light up, the fluorescent tube has reached the
end of its operational life span. Please inquire at the shop where you purchased the TV or your
nearest Sharp authorized Service Center.
- In the initial period of use, due to the characteristics of fluorescent tubes the screen may flicker. (This
is not a malfunction.) Should this happen, check by first turning off the power, then turning it on again.
Problem
There is no picture.
(Power LED does not light.)
There is no picture.
(Power LED is lit orange.)
The image appears distorted.
The remote control does not work.
There is no TV picture.
A particular channel will not tune in.
There are stripes or dots on
TV picture.
The picture wavers.
The TV picture is doubled.
There are color bands.
The TV picture is distorted.
What to Check
-
Are the AC adapter and power cord properly connected? Disconnect
the power plug from the AC outlet and reconnect it again
. (Page E22)
- Is power turned on? (Page E27)
-
Is the TV properly connected to the computer?
(Pages E20 and E21)
- Is the computer turned on?
- Is the PC signal input terminal (analog or digital) properly
selected? (Page E27)
- Does the computer's signal timing correspond to TV
specifications? (Page E61)
- Is the computer in power-saving mode?
Try pressing a key on the keyboard or moving the mouse.
- Does the computer's signal timing correspond to TV
specifications? (Page E61)
- If you are using the analog signal, perform automatic screen
adjustment. (Page E26)
- Change the Vsync frequency (refresh rate) on the computer you
are using to a low value if possible. (Page E61)
- Have the batteries of the remote control run out? (Page E13)
- Are the batteries placed in the right direction in the remote
control? (Page E13)
- Is the adjustment lock set? (Page E56)
- Is the TV connected to an antenna? Check the connection.
(Pages E16 and E17)
- Is the TV switched to TV mode? (Page E27)
- Have you set TV channels properly? (Pages E23 to E25)
- Did you set "BRIGHT MODE" to "OFF"? (Page E56)
- Have you set TV channels properly? (Pages E23 to E25)
- Is there interference from automobiles, trains, neon signs,
computers, or other sources?
- Place the antenna as far as possible away from potential
sources of interference.
- Place the antenna line as far as possible from the computer.
- Is the antenna facing the right direction?
There may be reflected electric waves from nearby mountains
or buildings. Try changing the antenna's height and direction.
- Is there interference from a nearby TV?
Changing the antenna's height and direction may help.
- Try switching power off, waiting several seconds, and then
turning power back on.
LD-23SH1U_gb_02.P65 2005/01/20, 20:2358
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LD-23SH1U Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LD-23SH1U Operation Manual in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info