525758
56
Zoom out
Zoom in
Previous page
1/94
Next page
54
Time shift playback
Playback recorded scenes of the programme being
recorded.
Press
d during recording.
• Press H to return the scene that is broadcasting.
NOTE
You can also operate from the control panel by pressing
CONTROL.
Time shift playback may take a few moments to start.
Time shift playback will stop and the TV will return to
normal broadcasting when a program is fast-forwarded
to a scene that is near to the scene currently being
broadcast. The timing at which it returns depends on
the speed of fast-forwarding.
Depending on the protection signal specified by a
broadcast station, recorded broadcasts can only be
played back for a certain period of time or cannot be
played back at all (Page 12).
NOTE for France
When switched scramble broadcast and non-scramble
broadcast during time shift playback, a black screen
may be displayed.
Display information regarding USB-
recording
Channel display
Channel information displays by pressing p on the
remote control unit.
Audio (ENG) STEREO
Video
Subtitle Off
>> New information
The recording icon shows up when REC E is
pressed and the TV is recording the programme.
The status icon shows up depending on what
is shown on the screen.
Counter
The counter displays on the screen with the control
panel.
00:02:38/00:08:18
Current playback time
Hidden during recording
Total playback time of the content
The grey bar shows how much time has
progressed.
Hidden during recording or playback-during-
recording
NOTE
You can also call up the information above by pressing
CONTROL on the remote control unit or select “Control
(USB REC)” from “TV Menu” > “Setup” > “Option” >
“Option for view”.
View setting
Auto input selection
You can choose whether or not to switch the input
source automatically when receiving an AQUOS
LINK or an Euro SCART compatible signal on the TV
during USB-recording operations.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Auto input selection”.
Item
Enable
Release USB-recording when receiving
an AQUOS LINK or a Euro SCART
compatible signal. Switch input source
automatically.
Disable
USB-recording continues to work.
The TV does not switch input source
automatically even when receiving
an AQUOS LINK or a Euro SCART
compatible signal.
View setting
Jump time setting
You can set the time interval for playback to resume
after jumping backwards/forward.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Jump time setting”.
A time interval from 10 sec. to 99 min. 50 sec can
be selected.
NOTE
You can use the time interval you set using the a or
b buttons.
View setting
Device registration
You need to perform this function to register the
USB HDD for the USB-recording.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device registration”.
• Refer to USB HDD registration (Page 51).
NOTE
Only one USB HDD can be registered for USB-
recording. Remove all USB HDDs except the one used
for USB-recording.
At least USB HDDs with memory between 100GB
and 2TB and under are required for USB-recording to
register.
Some USB HDDs, such as ones which have multiple
drives, etc., cannot be used for USB-recording.
View setting
Device format
You can format all data on the USB HDD.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device format”.
NOTE
Once formatting has been completed, data cannot be
restored.
Other useful features
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-80LE857E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-80LE857E in the language / languages: English as an attachment in your email.

The manual is 7,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-80LE857E

Sharp LC-80LE857E User Manual - German - 94 pages

Sharp LC-80LE857E User Manual - Dutch - 94 pages

Sharp LC-80LE857E User Manual - Dutch - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info