525758
54
Zoom out
Zoom in
Previous page
1/94
Next page
52
How to operate USB-recording
You can enjoy DTV/SAT recording or playback by
connecting a commercially available USB HDD to
the TV.
CAUTION
Do not unplug the AC cord or turn off the MAIN POWER
switch during USB-recording timer setting or USB-
recording.
When the AC cord is unplugged and the MAIN POWER
switch is turned off:
The USB-recording timer setting is cancelled.
USB-recording may be automatically stopped when
signal reception is poor.
Only this TV can playback the programme recorded on
the USB HDD connected to this TV. The programmes
cannot playback on other TV or PC.
When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN code
in advance (Page 12).
SHARP corporation bears no responsibility regarding
compensation for content when recording cannot does
not take place, loss of recorded data or other direct or
indirect damages related to these matters. Please be
forewarned.
E
Buttons for USB-recording operation
Remote control unit Control panel
Buttons Description
Displays the list of the programmes
recorded by USB-recording.
REC E
Start recording the programme you are
watching.
You cannot playback the recorded
programme until several seconds
after pressing REC E to start
recording.
REC STOP H
Stop recording.
I
Playback the recorded programme.
H
Stop the programme in playback and
go back to the real time broadcast
(live).
F
Pause the programme in playback
(USB-recording continues).
This function is released in 15
minutes.
S
Reverse (each time you press this
button, the reverse speed changes in
three levels).
J
Fast forward (each time you press this
button, the fast forward speed changes
in three levels).
K
Jump backward to the previous
chapter point*.
L
Jump forward to the next chapter
point*.
a
Playback will resume after jumping
backward by the time interval you set
in “Jump time setting” (Page 54).
b
Playback will resume after jumping
forward by the time interval you set in
“Jump time setting” (Page 54).
* Chapter points are fixed at 10 minute increments.
NOTE
• Refer to Regarding “Select recording device” (Page 31),
when the buttons for USB-recording do not work.
Instead of pressing buttons on the remote control
unit, most of the operations shown to the left are also
available on the screen with the control panel. You can
call up this control panel by pressing CONTROL on the
remote control unit or select “Control (USB REC)” from
“TV Menu” > “Setup” > “Option” > “Option for view”.
The “Audio description setting” menu does not work
during USB-recording playback.
USB-recording stops if no operation detected for three
hours.
When recording operations are not stopped manually,
recording will automatically stop after six hours.
To release USB-recording, press REC STOP H, change
the DTV/SAT channel or change “INPUT”.
Some functions do not work during USB-recording.
USB-recording does not start automatically, but starts
only when REC E is pressed or when a USB-recording
timer setting is started.
The PIN is required when you use the buttons such as
S, J, K, L, a, b if you set the PIN and
any options for “Parental rating” except “None” are
selected.
Do not disconnect the USB-HDD used for USB-
recording during USB-recording operation.
MHP services do not work during USB-recording
playback (858 series only).
Other useful features
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-80LE857E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-80LE857E in the language / languages: English as an attachment in your email.

The manual is 7,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-80LE857E

Sharp LC-80LE857E User Manual - German - 94 pages

Sharp LC-80LE857E User Manual - Dutch - 94 pages

Sharp LC-80LE857E User Manual - Dutch - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info