141769
19
Zoom out
Zoom in
Previous page
1/40
Next page
You can block the viewing of any channel.
NOTE
See “Child Lock” for setting PIN.
When Lock is set to “On” for a channel, “Child lock has
been activated.” displays, and the image and sound of the
channel are blocked.
• When pressing OK while “Child lock has been activated.”
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
Menu operations
Sort
Channel positions can be sorted freely.
Repeat steps 1 to 4 in Programme Setup.
Press c/d to select “Yes”, and then press OK.
Press a/b/c/d to select the channel you
want to move, and then press OK.
Press a/b/c/d to move it to the desired
position, and then press OK.
Repeat steps 3 and 4 until all desired channels
are sorted.
Erase Programme
An individual programme can be erased.
Repeat steps 1 to 4 in Programme Setup.
Press c/d to select “Yes”, and then press
OK.
Press a/b/c/d to select the channel you
want to erase, and then press OK.
A message screen pops up.
Press c/d to select “Yes”, and then press
OK to erase the selected programme. All the
subsequent programmes move up.
Repeat steps 3 and 4 until all desired channels
are erased.
Child Lock
Allows you to use a PIN to protect certain settings from
being accidentally changed.
Changing the PIN
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Child Lock”, and then
press OK.
New PIN
Reconfirm
Change PIN
Reset
1
2
3
4
5
1
2
3
4
5
1
2
3
Enter the 4-digit number as a PIN using 0 – 9.
Enter the same 4-digit number as in step 4 to
confirm.
“The system PIN has been changed successfully”
displays.
NOTE
To view a locked channel, you must enter a PIN. (See this
page and page 27 for locking channels from viewing in
analogue TV and DTV mode.) When you select a locked
channel, a PIN prompt message pops up. Press OK to
display the PIN input window.
Resetting the PIN
Allow you to reset your PIN to the factory preset
“1234”.
Repeat steps 1 to 3 in Changing the PIN.
Enter the PIN.
Press a/b to select “Reset”, and then press
OK.
Press c/d to select “Yes”, and then press OK.
NOTE
As a precautionary measure, make a note of your PIN
on the back of this operation manual, cut it out and
keep it in a safe place that children cannot reach.
See page 32 for resetting the current PIN to the
factory preset “1234” if you lose or forget your PIN.
Input Label
You can assign each input source a label you like.
Press b to select the desired input source.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Input Label”, and then
press OK.
Press a/b/c/d to select each character of
the new name for the input source, and then
press OK.
Repeat step 5 above until the name is fully spelt
out, and then press OK.
The name can be 6 characters or less.
If a label name is less than 6 characters, select
“END”, then press OK.
NOTE
You cannot change the label if the input source is TV or
DTV.
4
5
1
2
3
4
1
2
3
4
5
6
17
Lock
TV only
LC-26D44E-gb.indd 17LC-26D44E-gb.indd 17 2008/02/19 10:21:322008/02/19 10:21:32
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp lc 26d44e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp lc 26d44e in the language / languages: English as an attachment in your email.

The manual is 8,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info