141769
21
Zoom out
Zoom in
Previous page
1/40
Next page
Menu operations
DNR (Digital Noise Reduction)
Menu Operation: A (page 12)
Produce a clearer image. (Off, High, Low)
HDMI Setup
HDMI (High-Definition Multimedia Interface) terminal
selection.
To watch an HDMI equipment image, select
“EXT6” or “EXT7” (the terminal which you are
using) from “INPUT SOURCE” menu using b
on the remote control unit or TV.
Press MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “HDMI Setup”, and then
press OK.
“HDMI Setup” is displayed only when “EXT6” or
“EXT7” is selected from the INPUT SOURCE menu.
MENU
[
Option
...
HDMI Setup
]
Option
Audio Only
DNR
HDMI Setup
[Off]
Press a/b to select the desired item, and then
press OK.
Press a/b/c/d to select the desired setting,
and then press OK.
HDMI Setup
items
Selectable items Description
Signal Type*
RGB/YCbCr 4:4:4/
YCbCr 4:2:2
Select the video signal
type from the HDMI
terminal.
Colour Matrix*
ITU601/ITU709 Select the internal
colour space
conversion method
when an RGB signal
is input.
Dynamic
Range*
Normal/Enhanced Select the signal
amplitude range.
Usually, select
“Normal”.
Auto View
Disable/Enable Set whether or not
to use WIDE MODE
based on signal
recognition, including
an HDMI signal.
Audio Select**
Digital/Analogue Select “Digital” for
audio signal via the
HDMI terminal. Select
“Analogue” for audio
signal via the AUDIO
jack.
NOTE
Refer to your external equipment operation manual for the
signal type.
Items marked * may be greyed out (with 4) depending on
the type of signal input from the external equipment.
Item marked ** is only available when EXT6 is selected.
1
2
3
4
5
6
Input Select
Menu Operation: A (page 12)
For setting the signal type of external equipment.
Input source Signal type
EXT 1
Y/C, CVBS, RGB
EXT 2
Y/C, CVBS, RGB
NOTE
If no (colour) image displays, try to change the other
signal type.
Check the operation manual of the external equipment for
the signal type.
TV, EXT3, EXT4, EXT5, EXT6 and EXT7 are not displayed in
Input Select.
If both CVBS and RGB signals are input to EXT 1 or EXT
2 using a SCART cable, the TV may output an RGB signal
even though you have designated CVBS for the respective
terminal. This happens due to the setting of your external
equipment.
Colour System
Menu Operation: A (page 12)
You can change the colour system to one that is
compatible with the image on the screen. (AUTO, PAL,
SECAM, NTSC3.58, NTSC4.43, PAL-60)
NOTE
Factory preset value is “AUTO”.
If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, SECAM).
“NTSC3.58”, “NTSC4.43” and “PAL-60” cannot be
selected in TV tuner mode.
19
TV/DTV/AV only
AV only
TV/AV only
LC-26D44E-gb.indd 19LC-26D44E-gb.indd 19 2008/02/19 10:21:332008/02/19 10:21:33
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp lc 26d44e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp lc 26d44e in the language / languages: English as an attachment in your email.

The manual is 8,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info