Manual Sharp LC-20B8U-S Operation Manual (page 15 of 45) (English, French, Portuguese, Spanish)

13281

Zoom out

Zoom in

1/45

Setting the CLOCK

AUTO CLOCK Setting

There are two methods of setting the clock: AUTO CLOCK

and MANUAL CLOCK. AUTO CLOCK uses EDS signals,

which are provided by some TV stations, to automatically

adjust the clock. MANUAL CLOCK sets the clock manually in

areas where no channel carries EDS signals.

Press MENU to display the Menu screen.

Press \/| to select “SETUP”.

Press '/" to select “CLOCK”, and press ENTER.

SETUP

OPTION

CH– SETTING

MTS

CLOCK

INPUT4 SELECT

V – CHIP BLOCK

CLOSED CAPTION

COLOR SYSTEM

PC SETTING

LANGUAGE

Press '/" to select “SET”, and press ENTER.

SET

TIME DISPLAY AUTO

MANUAL

Press '/" to select “AUTO”, and press ENTER.

●

If you do not know the channel that carries EDS signals in your

area, set “EDS CH” to “AUTO” and press ENTER. If you know the

channel of the EDS signal carrier in your area, press \/| to select

the channel and press ENTER.

SET

TIME DISPLAY EDS CH AUTO

● When set to “AUTO CLOCK”, the current time is acquired

automatically when the main power is turned OFF. (This function

will not work when EDS CH is not set.)

■ Backup

The clock function is maintained for about 5 minutes even

when the AC cord has been shut off due to a power outage

or when moving the LCD TV set. (Since about 30 minutes

are required to charge the backup power supply, it may not

be possible to maintain the clock function if the charging time

is excessively short.)

If the clock setting has been reset, repeat the procedures on

this page.

MANUAL CLOCK Setting

If there are no channels with EDS signals, set the clock

manually using MANUAL CLOCK.

Repeat steps 1 to 4 of AUTO CLOCK Setting.

Press '/" to select “MANUAL”, and press ENTER.

SET

TIME DISPLAY AUTO

MANUAL

Press '/" to select “DST”, and press \/| to select

“ON” or “OFF”.

Press '/" to select “TIME”, and press \/| to set the

time, and press ENTER.

12:00AM 11:59AM

11:59PM 12:00PM

• Holding down \/| changes the setting at a high speed.

SET

TIME DISPLAY DST OFF

TIME 12: AM

Press MENU to exit.

•Make sure to press ENTER after adjusting the time. Otherwise,

the time will not be set.

• When “DST” is set to “ON”, the time entered is forwarded by 1

hour.

• Please be sure to set “DST” before setting “TIME”.

• CLOCK:

The AUTO CLOCK setting may take from several minutes to an hour

depending on the number of channels to receive and signal status.

• EDS CH < AUTO >:

If there are no channels with EDS signals or the antenna signal is

weak, the AUTO CLOCK Setting may not operate. In such a

case, the message “EDS CH IS NOT AVAILABLE.” appears, and

the CLOCK setting screen (in step 4 in AUTO CLOCK Setting) is

displayed. Refer to MANUAL CLOCK Setting to set the clock

manually.

• EDS CH < Not AUTO >:

If the channel you have selected for “EDS CH” is wrong or the EDS

signal carrier is weak, or when there is no broadcast, the AUTO

CLOCK Setting may not operate. In such cases, the message

“EDS CH (XXX) EDS DATA IS NOT AVAILABLE.” appears, and

the CLOCK setting screen (in step 4 in AUTO CLOCK Setting) is

displayed as in the case with EDS CH < AUTO >. Follow step 4

and repeat the AUTO CLOCK Setting procedure.

• If broadcasting channels are not memorized, EDS signals cannot

be received even when the “EDS CH” is set to “AUTO”. In this

case, try EZ SETUP again. (See pages 23 and 24.)

LC-20B8U_E_P13-18.p65 05.2.3, 2:04 PM14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-20B8U-S Operation Manual in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp LC-20B8U-S Operation Manual Manual

Product: