Manual Sharp LC-20B8U-S Operation Manual (page 14 of 45) (English, French, Portuguese, Spanish)

13281

Zoom out

Zoom in

1/45

Press POWER on the upper side of the main unit, to

turn on the TV. The SELECT LANGUAGE screen will

be displayed.

Press '/" to select “ENGLISH”, “ESPAÑOL”

(Spanish) or “FRANÇAIS” (French).

ENGLISH

ESPAÑ OL

FRANÇ AIS

Press ENTER to access CH-SETTING mode.

Press '/" to select “ON” or “OFF”. When you select

“ON”, the LCD TV set will automatically memorize the

broadcasting channels.

OFF

• If you select “OFF”, EZ SETUP will be canceled.

Press ENTER to access AUTO CLOCK mode.

Press '/" to select “ON” or “OFF”.

When you select “ON”, the LCD TV set will

automatically adjust the clock to search time-signals

(EDS signals), which are provided by some TV stations.

The AUTO CLOCK setting may take from several

minutes to an hour depending on the number of

channels to receive and signal status. If you know the

channel of the EDS signal carrier (PBS or other) in your

area, select “OFF” and follow the procedure in AUTO

CLOCK Setting. (See page 14.)

OFF

EZ SETUP (With AUTO CLOCK Setting)

EZ SETUP during the First Power On

■ When you turn on the LCD TV set for the first time, it will

automatically memorize the broadcasting channels and

clock.

Please perform the following instructions before you press

POWER.

(1)

Insert the batteries into the remote control. (See page 7.)

(2)

Connect the antenna cable to the LCD TV set. (See page 8.)

(3) Connect the AC cord to the AC INPUT terminal of the

LCD TV set and plug in the AC cord to the wall outlet.

(See page 9.)

POWER

Press ENTER to access START EZ SETUP mode.

Press '/" to select “YES”, and press ENTER.

• If you want to stop the EZ SETUP process once it has

started, press MENU and it will be canceled. If you want to

set up again, please refer to CH-SETTING on pages 23 and

24.

YES

CONNECT ANTENNA

OR CABLE.

The tuner will automatically search for the broadcasting

and cable TV channels. (The channel number will

automatically increase when it appears.)

PLEASE WAIT

AUTO PROGRAMMING

The LCD TV set will automatically switch to searching

for EDS signals.

If EDS signals are received, the channel number and time will

be displayed, and then the screen shown in step 5 appears.

PLEASE WAIT

NOW SEARCHING TIME

Once EZ SETUP is completed, the lowest channel

number memorized will be displayed.

STEREO

SAP

MONO 11:53AM

• Do not let the EZ SETUP screen remain unattended for a long time.

• If EZ SETUP does not memorize all the channels in your region,

please refer to pages 23 and 24 for more information on manually

memorizing the channels using CH-SETTING.

• It may be difficult to preset when the broadcasting signals are

weak, the channel cycle frequency is incorrect or the frequency

jamming is occurring around the area. Please refer to pages 23

and 24 for more information on manually memorizing channels

using CH-SETTING.

• If there are no channels with EDS signals or the antenna signal is

weak, the AUTO CLOCK setting may not operate. In this case, the

“EDS CH IS NOT AVAILABLE.” message will appear and the

mode will change to MANUAL CLOCK setting. Refer to page 14 to

set the clock manually.

LC-20B8U_E_P13-18.p65 05.2.4, 11:36 AM13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-20B8U-S Operation Manual in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp LC-20B8U-S Operation Manual Manual

Product: