13269

Sharp LC-15L1U-S Operation Manual Manual

67
Zoom out
Zoom in
Previous page
1/69
Next page
LC-15L1U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
TELEVISOR DE CRISTAL
LÍQUIDO
LC-15L1U
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Printed on 100% post-consumer recycled paper.
Imprimé sur 100% de papier recyclé.
Impreso en 100% de papel reciclado de postconsumo.
Papel 100% Reciclado-Cuidado do Meio Ambiente.
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-B124WJZZ
04P02-###
ENGLISH
1
LC-15L1U
LIQUID CRYSTAL TELEVISION
OPERATION MANUAL
ENGLISH
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within a triangle is intended to
alert the user to the presence of important operating
and maintenance (servicing) instructions in the
literature accompanying the product.
IMPORTANT:
To aid reporting in case of loss or theft, please record the TV’s model
and serial numbers in the space provided. The numbers are located at
the rear of the TV.
U.S.A. ONLY
Model No.:
Serial No.:
2
IMPORTANT INFORMATION (Continued)
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user’s authority to operate this equipment.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical
Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.”
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
U.S.A. ONLY
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these
materials may be regulated due to environmental considerations. For disposal or recycling information, please contact
your local authorities or the Electronic Industries Alliance: www.eia.org
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the operation manual, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
U.S.A. ONLY
The device’s label or the user manual contains this statement (or equivalent): “To prevent radio interference to the
licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.”
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
ENGLISH
3
CONTENTS
Page
IMPORTANT INFORMATION................................... 1
DEAR SHARP CUSTOMER ..................................... 4
IMPORTANT SAFETY PRECAUTIONS .................. 4
REGARDING BATTERY CARE ............................... 7
CORRECT USE OF THE PRODUCT ....................... 9
SUPPLIED ACCESSORIES ................................... 10
PREPARATION....................................................... 11
MAIN UNIT PART NAMES ..................................... 14
WIRELESS CENTER PART NAMES ..................... 17
REMOTE CONTROL .............................................. 18
POWER ................................................................... 19
Turning the Main Power on and off .................. 19
Viewing with a Home AC Wall Outlet ............... 21
EZ SETUP (WITH AUTO CLOCK SETTING) ........ 22
EZ Setup during the First Power On ................ 22
SETTING THE CLOCK ........................................... 24
AUTO CLOCK Setting ....................................... 24
MANUAL CLOCK Setting.................................. 26
TV SIGNALS IN YOUR REGLON .......................... 27
BATTERY CHARGE AND TRANSMISSION
SETTING .............................................................. 28
Battery Charge .................................................. 28
Transmission Setting ......................................... 28
BASIC OPERATION ............................................... 31
Turning on Power .............................................. 31
Standby.............................................................. 31
Switching TV/VIDEO [AV1/AV2/AV3/AV4]
Modes ............................................................. 32
Sound Volume ................................................... 33
Changing Channels ........................................... 34
SELECTING MENU ITEMS .................................... 35
ADJUSTMENTS ...................................................... 36
Adjusting SLEEP TIMER Settings .................... 36
Adjusting BRIGHTNESS Settings ..................... 37
Adjusting PICTURE FLIP Settings.................... 38
Adjusting PRESET Settings .............................. 39
Adjusting LANGUAGE Settings ........................ 40
Adjusting VIDEO ADJUST Settings .................. 41
SETUP ............................................................... 43
Adjusting BLUE SCREEN Settings................... 45
Adjusting CLOSED CAPTION Settings ............ 46
Adjusting V-CHIP Settings ................................ 47
CONNECTION SYSTEM WITH VARIOUS WAYS
OF BEING USED ................................................. 54
Examples of Various Uses ................................ 54
Connecting System Chart of LC-15L1U ........... 55
Method of Connecting External Equipment ...... 56
Method of Using the Video Controller .............. 57
Watching Played back Image from External
Equipment....................................................... 58
Connecting a Home Video Game System, etc.
(AV-IN4) .......................................................... 59
How to Use Video 1 Output .............................. 60
Monitor Output for Picture and Sound Output
from AV-IN2/OUT Terminal ............................ 61
TROUBLESHOOTING ............................................ 62
SPECIFICATIONS................................................... 65
DIMENSIONAL DRAWINGS .................................. 66
CALLING FOR SERVICE ....................................... 67
LIMITED WARRANTY ............................................ 67
Page
4
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
IMPORTANT SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your
LCD color TV product, please read the following precautions carefully before using the product.
■ Read instructions—All operating instructions must be read and understood before the product is operated.
■ Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for future
reference.
■ Observe warnings—All warnings on the product and in the instructions must be observed closely.
■ Follow instructions—All operating instructions must be followed.
■ Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments
can result in accidents.
■ Power source—This product must operate on a power source specified on the specification label. If you are not
sure of the type of power supply used in your home, consult your dealer or local power company. For units
designed to operate on batteries or another power source, refer to the operating instructions.
■ Power cord protection—The power cords must be routed properly to prevent people from stepping on them or
objects from resting on them. Check the cords at the plugs and product.
■ If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a SHARP service
center or your dealer.
■ Overloading—Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
■ Entering of objects and liquids—Never insert an object into the product through vents or openings. High voltage
flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same
reason, do not spill water or liquid on the product.
■ Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and
other dangerous conditions. Request a qualified service person to perform servicing.
■ Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a quali-
fied service person to perform repairs.
a.When the power cord or plug is damaged.
b.When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d.When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of
controls not described in the instructions can cause damage, which often requires extensive adjustment work by
a qualified technician.
e.When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the
product needs servicing.
■ Replacement parts—In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
■ Safety checks—Upon completion of service or repair work, request the service technician to perform safety checks
to ensure that the product is in proper operating condition.
■ Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according
to the method recommended by the manufacturer.
■ Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
ENGLISH
5
IMPORTANT SAFETY PRECAUTIONS (Continued)
■ The Liquid Crystal panel is a very high technology product with 921,600 thin film transistors, giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.
■ Cleaning—Unplug the power cord from the AC outlet before cleaning the prod-
uct. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol
cleaners.
■ Water and moisture—Do not use the product near water, such as bathtub,
washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement.
■ Stand—Do not place the product on an unstable cart, stand, tripod or table.
Placing the product on an unstable base can cause the product to fall, resulting
in serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the
product. When mounting the product on a wall, be sure to follow the manufactur-
er’s instructions. Use only the mounting hardware recommended by the manu-
facturer.
■ When relocating the product placed on a cart, it must be moved with utmost
care. Sudden stops, excessive force and uneven floor surface can cause the
product to fall from the cart.
■ Ventilation—The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other similar surface, since they can
block ventilation openings. This product is not designed for built-in installation; do
not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instructions are followed.
■ The Liquid Crystal panel used in this product is made of glass. Therefore, it can
break when the product is dropped or applied with impact. Be careful not to be
injured by broken glass pieces in case the Liquid Crystal panel breaks.
■ Heat sources—Keep the product away from heat sources such as radiators,
heaters, stoves and other heat-generating products (including amplifiers).
6
IMPORTANT SAFETY PRECAUTIONS (Continued)
■ If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical
Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
■ Power Lines – An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC—NATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
■ Lighting – For added protection for this television equipment during a lightning
storm, or when it is left unattended and unused for long period of time, unplug it
from the wall outlet and disconnect the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.
■ To prevent fire, never place any type of candle or naked flames on the top or
near the TV set.
■ To prevent fire or shock hazard, do not expose this products to dripping or
splashing. No objects filled with liquids, such as vases, should be placed on the
products.
ENGLISH
7
REGARDING BATTERY CARE
• Charge the battery only at temperatures within the range of
50°F to 86°F (10°C to 30°C) (temperatures that are comfort-
able for people). At lower temperatures it becomes more
difficult to charge the battery and the battery deteriorates. It is
not possible to sufficiently charge the battery at high tempera-
tures.
• The battery may become hot during charging or during use,
but this is not a sign of malfunctioning.
• It may take more time to fully charge a hot battery.
Precautions to be Taken during Charging
Regarding Operating Time and Use under Low Temperatures for the Battery
• The battery has a certain life expectancy. The battery is
consumed as time elapses even if the battery is not used. A
battery that has been used for about a year may give you less
operating time depending on the conditions under which it
was stored. If a battery that has been charged correctly
operates for a much shorter time than usual, it has reached
the end of its life and must be replaced with a new battery.
• When the battery is at a low temperature (lower than 50°F
(10°C)) in winter, the operating time may be very short. The
battery undergoes an internal chemical reaction in order to
generate electricity. When the temperature outside is lower,
the chemical reaction becomes less vigorous and operating
time becomes shorter.
How to Get the Most out of the Battery
• Turn off the power supply frequently when not in use in order to give the battery longer life.
• The battery is consumed as time elapses even if the battery is
not used. To prevent consumption;
(1) If the battery will not be used for a long time, use the
product to run down what is left of the battery charge and
set “Battery charge” to “off” in the menu screen. (Refer to
page 28.)
(2) Make sure to use the battery at least once every six
months.
Storage Precautions
Charge the battery before use.
Battery type lithium-ion battery
Nominal voltage 11.1 V
Battery capacity 5700 mAh
Operating temperature 50°F to 86°F (10°C to 30°C)
Maximum dimensions appx. Length 8
23
/64 inch (212 mm) × Width 1
5
/8 inch (41 mm) × Height 1
35
/64 inch (39 mm)
Weight appx. 1.1 lbs. (0.5 kg)
• The battery used in the product is a lithium-ion battery. Even if
the battery is charged and stored, the amount of charge in the
battery will drop.
• Make sure to charge the battery until the charge indicator of
the product goes off (fully charged). The operating time is
shortened when using a battery which has not been fully
charged. (For a detailed description of how to charge the
battery, refer to page 20.)
Battery Specification
8
REGARDING BATTERY CARE (Continued)
Prohibited use for which safety is not guaranteed.
• Do not try to disassemble or modify the battery. The battery
contains safety mechanisms and protection devices.
Damaging these safety devices may cause the battery to
generate heat or smoke, or to rupture or ignite.
• Do not connect the + and – terminals together with metal
such as wires. Do not carry or store the battery together
with metal objects such as necklaces and hairpins. Doing
so may cause the battery to be short-circuited so as to
cause an extremely large amount of electric current to flow,
which may cause the battery to generate heat or smoke,
rupture or ignite, or may cause metal objects such as wire,
necklaces, or hairpins to heat up.
• Do not expose batteries to fire or heat. Doing so may cause
insulating materials to melt, damage gas exhaust valves or
safety mechanisms, or ignite electrolytic solutions, which
may cause the battery to generate heat or smoke, rupture
or ignite.
• Do not leave the battery in or near fire, stoves, or other
high-temperature locations (of temperatures greater than
140°F (60°C)). If a resin separator is damaged by heat, the
battery may become internally short-circuited and this may
cause the battery to generate heat or smoke, rupture or
ignite.
• Do not expose the battery to water or salt water, or allow
the battery to get wet. If the protection device contained in
the battery is broken, this may cause the battery to gener-
ate heat or smoke, rupture or ignite.
• Do not charge the battery near a fire or in direct sunlight. If
the battery becomes hot, the protection device for prevent-
ing danger operates to disable the battery from being
charged. If the protection device contained in the battery
becomes broken, the battery is charged at an abnormal
electric current or voltage. An abnormal chemical reaction
occurs inside the battery which may cause the battery to
generate heat or smoke, rupture or ignite.
• Charge the battery in compliance with the specified charg-
ing conditions. If the battery is charged without compliance
to the charging conditions (at temperatures greater than the
specified temperature, at voltages and electric current
greater than the specified amount or with modified charg-
ers), the battery may be overcharged or charged at an
abnormal electric current and an abnormal chemical
reaction may occur inside the battery, which may cause the
battery to generate heat or smoke, rupture or ignite.
• Do not pierce the battery with nails, strike the battery with a
hammer, or step on the battery. Doing so may cause the
battery to generate heat or smoke, rupture or ignite.
• Do not subject the battery to strong impacts or throw it
away. If the protection device contained in the battery
becomes broken, the battery is charged at an abnormal
electric current or voltage. An abnormal chemical reaction
may then occur inside the battery, which may cause the
battery to generate heat or smoke, rupture or ignite.
• Do not use the battery if it has been considerably damaged
or deformed. This may cause the battery to generate heat
or smoke, rupture or ignite.
• Do not solder directly onto the battery. Doing so may cause
insulating materials to melt, or damage gas exhaust valves
or the safety mechanism, which may cause the battery to
generate heat or smoke, rupture or ignite.
• Use a battery case when carrying the battery.
• Keep the battery out of reach of children.
• In the event that the fluid inside the battery gets into one’s
eye, do not rub the eye because this may cause loss of
eyesight. Rinse the eye with clean water and consult a
doctor immediately. In the event that the fluid becomes
attached to skin or clothes, wash it off with clean water
immediately as this may cause injury.
ENGLISH
9
CORRECT USE OF THE PRODUCT
Precautions Regarding Radio Waves
■ Do not use the product at the following locations. There may be cases where noise occurs or transmission/reception is
not possible.
• Locations where magnetic fields, electrostatic or interference occurs due to devices such as Bluetooth, wireless LANs, or
microwave ovens etc. that utilize the same frequency band (2.4 GHz) as the product. (There may be cases where radio waves
cannot reach depending on the environment.)
• Keep the product away from a radio devices during use. (There may be cases of noise interference.)
■ Under the same frequency band as the product uses, in addition to Bluetooth, wireless LANs, and microwave ovens
etc. that utilize the same frequency band (2.4 GHz) as the product, operation can also take place at on-site radio
stations that require a license for mobile object identification used in factories and manufacturing lines etc. and
specified low power radio stations.
• Before using the product, make sure that there is no on-site radio stations for mobile object identification or specified low power
radio stations operating in the vicinity of the product.
• If there is any interference occurring to on-site radio stations for mobile object identification due to the product, stop using the
product immediately.
Regarding Range of Usage
■ The product is limited to domestic use.
(There is a possibility that transmission distance may become short depending on the communication environment.)
■ In the following cases, reception may become bad or impossible, which may cause sound and pictures to be inter-
rupted (pictures and sound are stopped), or blocks of noise to appear.
• Using the product in a reinforced concrete building such as a condominium building or a house of a metal structure.
• Using the product at locations near large-scale metallic furniture.
• Using the product in a crowd of people or close to buildings or obstacles, etc.
• Using the product at locations where magnetic fields, electrostatic and interference occur due to devices such as Bluetooth,
wireless LANs, or microwave ovens, etc. that utilize the same frequency band (2.4 GHz) as the product.
■ Regarding reflected radio waves
• Radio waves that reach a television receiver are radio waves (direct waves) directly transmitted from a transmitter and radio
waves (reflected waves) arriving from various directions as a result of being reflected by walls, furniture, or buildings etc. There
are good and bad positions in terms of wave conditions due to the influence of these reflected waves, which may cause poor
picture reception. In this case, try changing the location of the TV receiver slightly. There are cases where pictures and sound
are distorted or interrupted due to the reflected waves as a result of a person passing over or approaching between the transmit-
ter and the television receiver.
When a signal other than a regular signal is input
• When a signal other than a regular signal that is incompatible with this unit is input, the screen may freeze, but this is not a
malfunction.
• When a signal other than a regular signal is input from the Antenna, AV-IN1, AV-IN2, or AV-IN3 terminals, reception may be bad
depending on the performance of the Wireless Center, and the message “THIS SIGNAL IS NOT COMPATIBLE” will display.
• Signals compatible with the Wireless Center are as follows:
H: 15.625 kHz / V: 50.0 Hz, 59.52 Hz
H: 15.73426 kHz / V: 59.94 Hz
(Note: Reception may be available with AV-IN4.)
Precaution Regarding Electromagnetic Wave Disturbance
• If electric devices, such as a cellular phone, are used near this unit, electromagnetic wave disturbance may occur between
apparatus. In such cases, the picture quality may decrease and noise may appear.
10
SUPPLIED ACCESSORIES
Confirm that the following accessories are provided with the product.
Wireless remote control (×1), Remote control holder (×1),
“AAA” size (UM/SUM-4) dry batteries (×2)
Wireless Center (×1), Wireless Center stand (×1)
Battery (×1)
AC adapters (×2)
Cable clamps (×2), Table stand (×1)
*Product shape varies in some countries.
Screws (×3)
(See pages 11, 15, 18) (See page 19)
(See pages 13, 21)
(See page 17)
(See page 59)
(See pages 55, 57, 60)
Terminal cover
SIGNAL LEVEL
MAIN
POWER
POWER
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
TELEVISOR DE CRISTAL
LÍQUIDO
LC-15L1U
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
ENGLISHFRANÇAISESPAÑOLPORTUGUÊS
Manuals
Video controller (×1)
(See page 12)
Antenna cables (×2)
RRMCGA152WJSA
LHLDZA216WJZZ
UBAT1A011WJZZ
GDAI-A074WJSA
TINS-B124WJZZ
QCNWGA033WJPZ
QCNWG0003CEPA
Connecting System Chart of
LC-15L1U
TCAUZA072WJZZ
Registration Card
TCAUDEA028WJZZ
Caution Sheet
TCAUZA071WJZZ
LHLDW0109CESA
(See page 15) CDAI-A072WJ02
QACCDA023WJPA × 2 pcs
UADP-A042WJPZ
UADP-A041WJPZ
QCNWG0004CEZZ
ENGLISH
11
PREPARATION
Using the Remote Control
■ Use the remote control by pointing it toward the remote control sensor window
on the main unit. Objects between the remote control and sensor window may
prevent proper operation.
Cautions regarding use of the remote control
■ Do not expose the remote control to shock.
In addition, do not expose the remote control to liquid, and do not place it in an
area with high humidity.
■ Do not install or place the remote control under direct sunlight. The heat may
cause deformation of the unit.
■ The remote control may not work properly if the remote control sensor window
of the main unit is under direct sunlight or strong lighting. In such cases,
change the angle of the lighting or LCD TV set, or operate the remote control
closer to the remote control sensor window.
Batteries for the Remote Control
Before using the LCD TV set for the first time, install two (“AAA” size, UM/SUM-4) batteries (supplied). When the batter-
ies become depleted and the remote control fails to operate, replace the batteries with new (“AAA” size, UM/SUM-4)
batteries.
1
Open the battery cover.
■ Slide the cover while pressing the
(b) part.
2
Insert two (“AAA” size, UM/SUM-
4) batteries.
+
–
+
–
■ Position the positive and negative
ends of the batteries as indicated in
the compartment.
Caution!
Cautions regarding batteries
Improper use of batteries can result in chemical leakage and/or explosion. Be sure to follow the instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) as indicated in the compartment.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new battery and/or cause the old
battery to leak chemicals.
• Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control will not be used for an extended period of time, remove the batteries from the remote control.
SLEEP indicator
CHARGE indicator
POWER indicator
Remote sensor window
CHARGE SLEEPPOWER
3
Close the battery cover.
■ Engage the claw on the cover into
the battery housing and slide shut.
66
DIMENSIONAL DRAWINGS
Unit: inch (mm)
CHCH
ENTER
P
O
W
E
R
DISPLAY
SLEEP PIC. FLIP
MUTE
VOL
BRIGHT TV/VIDEO MENU
FLASH
BACK
MTS
8
63
/
64
(228)
2
21
/
64
(59)
3
13
/
64
(81)
3
53
/
64
(97)
11
1
/
32
(280)
3
15
/
16
(100)
19
29
/
64
(494)
10
5
/
8
(269.5)
1
31
/
32
(50)
1
31
/
32
(50)
16
11
/
32
(415)
17
17
/
32
(445)
7
/
32
(5.5)
7
53
/
64
(198.5)
5
47
/
64
(145.5)
… 67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-15L1U-S Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-15L1U-S Operation Manual in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info