Manual Sharp ER-A180 (page 41 of 180) (English, German, French, Spanish)

485961

Zoom out

Zoom in

1/180

2. Make a fold in the paper approx. five centimeters from the end.

3. While pressing the

key, insert the folded end straight into the

paper inlet. The inserted end appears at the printing area.

4 When not using the take-up spool (using as receipt paper):

• Lead the end of the paper out through the manual cutter on the

printer cover. (Press the

key to advance the paper more if

required.)

When using the take-up spool (using as journal paper):

• Insert the end of the paper into the slit in the spool.

(Press the

key to feed more paper if required.)

• Wind the paper two or three turns around the spool shaft.

• If the holding plate is not attached to the spool, attach it by inserting

the spool shaft into the large hole and sliding it into the small one.

• Set the spool on the bearing, and press the

key to take up

excess slack in the paper.

5. Replace the printer cover.

• When using a paper roll as journal paper, you must change

the printer type. Refer to “Programming print format” on

page 30.

• When using 2-ply journal/receipt paper, follow the same

instructions as above, but lead the end of the receipt paper

out through the manual cutter after winding the journal

paper on the take-up spool shaft.

When printing becomes faded, replace the ink ribbon with a new one specified by SHARP.

Removal

To prevent the ink ribbon form drying or becoming dirty, do not remove it from its bag until just

before using.

1. Remove the printer cover.

2. Cut off the paper and press the

key to remove it.

3. Detach the ink ribbon cover.

Pull the tab in the direction of arrow to lift the cover.

Replacing the ink ribbon

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ER-A180 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 3,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp ER-A180 Manual

Product: