30752
33
Zoom out
Zoom in
Previous page
1/40
Next page
33
DV-AT4000
Video CD and Super Video CD Operation
- Video CD, Super Video CD playback -
"
To play in the desired order (programmed
play)
You can play back the desired tracks in the sequence you want.
Maximum of 19 tracks can be programmed.
To change the programmed contents:
Notes:
!
Programming cannot be performed while paused or in the playback mode.
!
Sequence programming does not work with a disc that disables programming.
!
To exit the programming procedure halfway through, press the P.MODE button.
!
To check the status during the programmed play, press the P.MODE button.
!
When operating SVCD/VCD with the P.B.C. function, set the sequential play mode
to SEQ.2 (see page 30).
1
While stopped, press the P.MODE
button.
Information on all the loaded discs is read,
and then the programming screen ap-
pears.
2
Press the button.
3
Press the or button to select
"Add" and press the ENTER button.
4
Press the or button to select a
disc number and press the ENTER
button.
5
Press the or button to select a
track number and press the ENTER
button.
NO Disc Index
RIGHT ARROW first, then select command. To play,
press PLAY, to quit, press PROGRAM.
Favorite List
NO Disc Index
Add
Insert
Modify
Delete
Clear
Favorite List
NO
Favorite List
Disc Index
Disc1
Disc2
Disc3
Disc4
Disc5
NO
Favorite List
Disc Index
1
2
3
4
6
Repeat steps 2 - 5 for other tracks.
Up to 19 tracks can be pro-
grammed.
7
Press the / button to start play.
!
"PROG." lights up on the main unit dur-
ing programmed play.
!
Programmed selections are memorized until a disc is removed or you turn the
power off.
!
The / button does not allow you to operate programmed play if the button
is pressed. In this case, press the P.MODE button to show the programming
screen and then press the / button.
!
Select one of the programmed tracks with the or button and then press
the / button. Playback will start from the selected track.
1 While stopped, press the P.MODE button.
2 Use the or button to select an item and then press the button.
3 Use the or button to select the desired command and then press the ENTER
button.
"Add"
Adds a track to the program.
"Insert"
Adds a track between programs. In this case, insertion is made above
(before) the selected program.
"Modify"
Modifies the program.
"Delete"
Deletes the selected program.
"Clear"
Deletes all programs.
NO
Favorite List
Disc Index
1
2
3
4
4
3
2
1
Track1
Track2
Track3
Track4
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp DVAT4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp DVAT4000 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info