30752
38
Zoom out
Zoom in
Previous page
1/40
Next page
38
DV-AT4000
SHARP 9HX55769150
References
- Troubleshooting chart -
Troubleshooting chart
Many potential problems can be resolved by the owner without calling a service tech-
nician.
If something is wrong with this product, check the following before calling your autho-
rized SHARP dealer or service center.
"
DVD player
"
Remote control
Symptom Possible cause Reference
page
No sound is heard.
!
The audio cable is disconnected.
P. 12
!
Is the TV or amplifier volume level
set to "0"?
Noise is heard during play-
back.
!
Move the unit away from any com-
puters or mobile phones.
When a button is pressed,
the unit does not respond.
!
Set this unit to the power stand-by
mode and then turn it back on.
P. 39
The display on the unit is
dark.
!
Is the display in the dimmer mode? P. 15
The power is not turned on.
!
Is the unit unplugged? P. 14
The sound is not reproduced
in the Dolby Digital 5.1 ch.
!
Is the initial setting screen set to
"LPCM"? Change it to "BitStream".
P. 12
No images are displayed.
!
Is TV turned on?
!
Is the input of TV switched?
Even though a disc has been
loaded, NO DISC is dis-
played.
!
Is the disc loaded upside down?
!
Is the disc very dirty?
Playback sounds are
skipped.
!
Does the disc satisfy the standards?
!
Is the unit located near excessive vi-
brations?
!
Has condensation formed inside the
unit?
P. 39
The control buttons do not
function. Music or video play-
back is interrupted.
!
Is the disc very dirty?
!
Does the disc satisfy the standards?
!
Is the unit located near excessive vi-
brations?
!
Has condensation formed inside the
unit?
P. 39
Symptom Possible cause Reference
page
Pictures and sound are
skipped.
!
Is the disc very dirty?
!
Is the unit located near excessive vi-
brations?
!
Has condensation formed inside the
unit?
P. 39
The unit does not operate
even if the power is on.
!
Is a disc other than a DVD (region
number 1 or ALL), SVCD, VCD, au-
dio CD, CD-R or CD-RW loaded?
P. 11
Image cannot be played
back. (Sound is not heard.)
!
Are the video and audio cables con-
nected improperly?
P. 12 - 14
!
Is a disc other than a DVD (region
number 1 or ALL), SVCD, VCD, au-
dio CD, CD-R or CD-RW loaded?
P. 11
!
Is the disc very dirty?
!
Is the disc loaded upside down?
!
Clean the optical pickup if it is dirty. P. 37
!
Is the TV input set to "VIDEO 1/VID-
EO 2" etc.?
!
Is the unit turned on? P. 15
Symptom Possible cause Reference
page
The remote control does not
operate properly.
!
Is the battery polarity respected? P. 15
!
Are the batteries dead?
!
Is the distance or angle incorrect? P. 15
!
Are there any obstructions in front of
the unit?
!
Is the remote control sensor ex-
posed to strong light (inverter fluo-
rescent light, direct sunlight, etc.)?
P. 15
!
Is the remote control for another
equipment used simultaneously?
The unit cannot be turned on
with the remote control.
!
Is the unit unplugged? P. 14
!
Are the batteries inserted? P. 15
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp DVAT4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp DVAT4000 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info