138269
96
Zoom out
Zoom in
Previous page
1/102
Next page
96 www.sharp.co.uk/support
The following conditions do not always denote trouble. Therefore, perform the checks described below
before calling for service. If the problem cannot be corrected by the use of this guide, remove the main
plugs from the wall socket, and contact the dealer or supplier from whom the unit was purchased in order to
obtain service. Where this is not possible please visit our web-site www.sharp.co.uk/support.
Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if
telephoning from Ireland).
Certain replacement parts and accessories may be obtained from our main parts distributor, who can be
contacted on the following numbers:
W
ILLOW VALE ELECTRONICS LTD.:
0121 766 5414
In the unlikely event of this equipment requiring repair during the guarantee period, you will need to provide
proof of the date of purchase to the repairing company. Please keep your invoice or receipt, which is
supplied at the time of purchase.
Troubleshooting
VCR/DVD
VCR
Problem
No power
The Remote does not work.
No picture
Dew
Suggested Solution
Is the power cord connected properly?
Is the power cord firmly plugged into the power outlet?
One of the safety mechanisms may be operating. In this event,
unplug the Unit from the power outlet briefly and then plug it in
again.
Are the batteries loaded correctly?
Are the batteries flat?
Is the signal emitter on the Remote pointing at the Unit?
Is the Remote too far from the Unit, or is there any obstacle between
the Remote and the Unit?
Did the VCR/DVD CHANGE Switch change correctly?
Did the VCR/DVD SELECTOR change correctly?
See page 6 for information.
Possible Cause/Solutions
Check all the cables are correctly connected.
Check your TV manual for correct tuning of your TV.
Reset the VCR and complete AUTO INSTALLATION again. (Refer
to VCR Reset on page 38.)
Make sure the power cord is plugged in.
Make sure the wall socket has power .
Make sure the TV is set to the video channel.
Check all connecting cables.
Adjust the tracking using CH '/".
Try another tape.
The video heads may have been contaminated - refer to a SHARP
Service Facility.
Ensure the VCR is connected to a stereo TV with a SCART lead.
Programme may not carry stereo.
Problem
TV will not tune in to the VCR.
Auto Installation screen does not
appear when the VCR is switched
on
or Auto Installation is not complete.
Display is not working.
No picture appears.
Playback picture is snowy.
Playback/Recording does not play
back in Stereo.
The following problems do not always denote a broken unit. Perform the checks listed below before calling
service.
DVNC65H096_101.pm6 30/8/02, 12:11 pm96
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp dv nc 65 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp dv nc 65 in the language / languages: English as an attachment in your email.

The manual is 16,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp dv nc 65

Sharp dv nc 65 User Manual - Dutch - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info