576370
9
Zoom out
Zoom in
Previous page
1/12
Next page
9www.sharkclean.com
TROUBLESHOOTING GUIDE & REPLACEMENT PARTS
PROBLEM
Vacuum will not operate
Charging indicator does not
illuminate
Motorized brush will not work
Vacuum will not pick up or suction
power is weak
Dust escapes from vacuum
Vacuum turns off on its own
Run time has decreased over time
SUGGESTED SOLUTION
1 The battery may be depleted. Charge the vacuum until the complete oval
around the power button is illuminated, indicating a complete charge.
2 See “Restarting after a jam” on page 8.
1 Check to see if the charge adapter is plugged in properly to the outlet and to
the charge stand.
2 Ensure that the vacuum is properly seated in the charging base.
3 Ensure there is no debris accumulated on the metal charge contacts on the
back of the nozzle and on the charge base.
4 Ensure that the electrical outlet is supplying power to the charger. Check the
fuse/breaker.
1 See “Cleaning the Motorized Brush and Clearing Blockages” on page 7 and
“Restarting after a jam” on page 8.
2 Ensure that the motorized brush is properly attached.
1 Empty the dust cup container.
2 Remove the dust cup filter, check for blockages and remove. Clean or
replace the dust cup filter (See “Replacement Parts” below). Note: It is
important to clean the dust cup filter every month.
3 The battery may need to be charged, charge until the complete oval around
the power button is illuminated.
4 Ensure that the motorized brush is properly attached.
1 Empty the dust cup container.
2 Ensure that the filter is inserted completely into its holder below
the dust cup.
3 Check for punctures in dust cup filter or cracks in the dust cup and replace.
1 Charge the unit until the complete oval around the power button is
illuminated.
1 Perform the following steps:
a Charge the vacuum for a minimum of 6 hours.
b Run the vacuum until it turns itself off.
c Charge the vacuum for a minimum of 6 hours.
REPLACEMENT PARTS
A XA1100 Charging Adapter
B XB1100 Battery pack
C XF1100 Filters (2)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark SV1107 Rotator Cordless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark SV1107 Rotator Cordless in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info