576370

Shark SV1107 Rotator Cordless Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
8 TOLL FREE: 1-800-798-7398
CARE AND MAINTENANCE - cont.
For any other servicing, call Customer Support at 1-800-798-7398
or visit www.sharkclean.com
4 Inspect the rotating brush for
a build-up of debris. Remove
anything wound around the
brush by carefully cutting it
with scissors. The brush roll is
equipped with a raised cutting
guide to make inserting scissors
easier. Avoid damaging or cutting
the bristles. (fig. 13)
5 Use a flashlight to inspect inside
the air duct at the bottom of the
main body and remove any debris
or blockages that may be there.
Reattach the motorized brush,
ensuring it clicks into place.
6 Remove the dust cup and use the
flashlight to check the air path
on the spine of the vacuum and
remove any debris or blockages.
Then replace the dust cup.
BRUSH BAR REMOVAL
1 For easier cleaning, the brush roll
can be removed from the nozzle.
Using a coin, turn the dial next to
the brush roll access door to the
unlock position. (fig. 14) Remove
the brush roll access door.
(fig. 15)
2 Slip the black belt off of the white
gear and lift out the brush roll.
(fig. 16)
BRUSH BAR INSERTION
1 To reinsert the brush roll, first slip
the black belt onto the white gear
(fig. 17a), then align the white
square on the opposite side of
the brush roll into the square slot.
(fig. 17b)
2 Align the white square on the belt
side and position into its slot.
(fig. 18)
3 Replace the door, inserting the
wheel side first. Use a coin to
move the dial to the lock position.
RESTARTING AFTER A JAM
If the indicator light around the power
button flashes, the brush bar has
jammed and will cease to operate.
1 Turn the unit off and allow it to
cool down for 10 seconds.
2 Ensure that nothing is blocking
the motorized brush or wrapped
around the brush bar.
3 Turn the power on and the unit
should operate normally.
fig. 14
fig. 15
fig. 16
fig. 17a
fig. 17b
fig. 18
fig. 13
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark SV1107 Rotator Cordless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark SV1107 Rotator Cordless in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info