Manual Shark IQ Robot AV993 Series (page 8 of 13) (English)

743719

Zoom out

Zoom in

1/13

sharkclean.comsharkclean.com

MAINTENANCE

CLEANING AND REPLACING THE FILTER

Remove and empty the dust bin. Clean any hair or

debris o the Anti-Tangle Comb on the back of

the dust bin.

Pull ﬁlter out of the dust bin by the tabs.

Lightly tap the ﬁlter to remove dust and debris. Reinsert the ﬁlter into the dust bin, then slide the

dust bin back into the robot.

For optimal suction power, regularly clean and replace the ﬁlter inside the robot's dust bin.

See sharkaccessories.com for replacement ﬁlters.

IMPORTANT: DO NOT use water when cleaning the ﬁlter.

SELF-CLEANING BRUSHROLL

MAINTENANCE

To access the brushroll, push up on the tabs on the

brushroll access door, then lift o the door.

The Self-Cleaning Brushroll actively removes hair wrap while your robot cleans. If some debris remains

wrapped around the brushroll, continue cleaning to allow the brushroll to clean itself.

Lift out the brushroll and clean o any debris.

Reinstall the brushroll, inserting the ﬂat end ﬁrst.

Close the brushroll access door and press down until

both sides click into place.

NOTE: Replace brushroll every 6 to 12 months, or when visibly worn. See sharkaccessories.com for replacement parts.

NOTE: When cutting away debris, be sure not to cut the brushroll.

NOTE: Make sure to insert the dust bin completely, until it clicks into place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Shark IQ Robot AV993 Series in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Shark IQ Robot AV993 Series Manual

Product: