Manual Shark IQ Robot AV993 Series (page 6 of 13) (English)

743719

Zoom out

Zoom in

1/13

sharkclean.comsharkclean.com

PREP YOUR HOME

USING THE SHARK IQ ROBOT®

MANUAL CLEANING MODE

To manually start a cleaning cycle, press the Clean button on the robot or on the

mobile app. To stop the robot before it ﬁnishes cleaning and automatically returns to

the dock, press the Dock button.

IMPORTANT: Before cleaning an entire room for

the ﬁrst time, we recommend that you ﬁrst test your

robot on a small section of the ﬂoor to ensure there

is no scratching.

NOTE: Scheduling is one of many features that are only available in the app.

Your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it

cleans. To prevent the robot from bumping into objects or navigating to areas you don't want it to, use the

included BotBoundary® strips. For best results, prepare your home as indicated below, and schedule a daily

cleaning to ensure all ﬂoor areas are regularly maintained.

NOTE: Be sure to charge the robot completely before its ﬁrst cleaning so that it can explore, map, and clean as much of

your home as possible. It may take up to 6 hours to fully charge your robot.

NOTE: Avoid picking up or moving the robot or dock. If either are relocated, the robot may not be able to follow its

intelligent cleaning path, or ﬁnd its way back to the dock. If the robot is picked up or moved for any reason, it should be

returned to within 6 inches of its last location.

Clean Dock

SCHEDULING

For a constant state of clean,

set up a cleaning schedule in

the app.

THRESHOLDS

Your robot may have trouble

clearing some thresholds higher

than 7/8ths of an inch. Block

o high thresholds with the

included BotBoundary® strips.

AVOID MOVING THE

ROBOT & DOCK

While your robot is cleaning,

do not pick it up and move it

to a dierent room, or move

the charging dock—this will

impact the robot’s navigation.

STAIRS

Your robot's cli sensors will

prevent it from falling o

ledges. For the cli sensors

to work properly, all runners,

rugs, or carpets must be at

least 8 inches from any stairs

(or extend over the edge of

the stairs.)

4-inch

Min.

BOTBOUNDARY® STRIPS

PREPPING YOUR HOME USING

BOTBOUNDARY STRIPS

Use the BotBoundary strips to quickly and easily

create no-go zones to keep your robot out of the

areas you would like it to avoid. These may include:

• Near power cords

• In front of thresholds higher than 7/8ths of an inch

USAGE INSTRUCTIONS

1. You can cut BotBoundary

strips to shorten them as

needed. (18-inch minimum)

If cutting a strip, make sure

it’s still long enough to

cover the entire area you

need to block o. Gaps may

cause BotBoundary strips to

malfunction.

2. Make sure each BotBoundary

strip lies completely ﬂat

against the ﬂoor, with no

overlapping. NOTE: DO NOT

place BotBoundary strips on

top of one another.

3. For best results, place the

strips between ﬁxed objects

like furniture legs or door

frames, or make a closed loop

around an obstacle.

(18” Minimum)

BotBoundary strip

BotBoundary® strips

BotBoundary strips

OBSTRUCTIONS

Clear cords and small objects

from ﬂoors and open interior

doors to ensure complete

coverage of your home.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Shark IQ Robot AV993 Series in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Shark IQ Robot AV993 Series Manual

Product: