Manual Shark IF200 (page 33 of 112) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

743229

Zoom out

Zoom in

1/112

ENGLISH

sharkclean.eu63 64

ENGLISH

sharkclean.eu63 64

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation, turn o

power and remove power pack before servicing.

Vacuum is not picking up debris, no suction or light suction.

(Refer to Maintenance section for more information.)

• Check ﬁlters to see if they need cleaning. Follow instructions for rinsing and completely

air-drying the ﬁlters before reinserting in the vacuum.

• Dust cup may be full; empty dust cup.

• Check ﬂoor nozzle for blockages; clear blockages if required.

• Remove any string, carpet ﬁbres, or hair that may be wrapped around the brushroll and Soft Roller

or trapped behind the Soft Roller.

• Check connection between handvac and wand for blockages; clear blockages if required. If the

issue persists, please contact Customer Service.

Vacuum lifts rugs.

• Check that vacuum is in EXTENDED RUNTIME mode. Take care when vacuuming rugs with

delicately sewn edges.

• Turn off the unit to disengage the brushroll and restart with the Power button.

Brushroll/Soft Roller does not spin.

• If Brushroll Indicator Light on the ﬂoor nozzle turns red, the brushroll and/or Soft Roller have

stopped spinning. Immediately turn off and remove Lithium ION Power Pack from handheld vacuum

and remove blockage before reconnecting and turning vacuum back on. If light turns green, the

blockage has been successfully cleared. If it remains red, please contact Customer Service.

• If headlights are not illuminated, there is a connection issue between the handheld vacuum, wand,

and nozzle. Try disconnecting and reattaching the pieces. If the headlights still do not illuminate,

please contact Customer Service.

Vacuum turns o on its own.

There are several possible reasons for the vacuum turning off on its own, including blockages, Lithium

ION Power Pack issues, and overheating. If vacuum turns off on its own, perform the following steps:

1. Check LED lights on Lithium ION Power Pack to see if it needs to be recharged. If power pack

does not need charging, turn off vacuum and remove power pack.

2. Empty dust cup and clean ﬁlters (see Maintenance section).

3. Check wand, accessories, and inlet openings and remove any blockages.

4. Allow unit and Lithium ION Power Pack to cool for at least 45 minutes, until it returns to room

temperature.

5. Return power pack to vacuum and press Power button.

Note: If vacuum still does not operate properly, contact Customer Service.

LED lights on ION Power Pack are ﬂashing.

• If top 2 or bottom 2 LED lights are ﬂashing (Fig. A, Fig. B), call Customer Service.

• Bottom LED light is ﬂashing (Fig. C): Lithium ION Power Pack needs to be charged.

• Top and bottom LED lights are ﬂashing (Fig. D): Lithium ION Power Pack temperature is not optimal,

so charging is temporarily paused. Leave power pack plugged in and charging will resume soon.

Fig. A Fig. B Fig. C Fig. D

LIGHT INDICATOR WHAT IT MEANS

“FLOOR” and “CARPET”

LEDs alternate

illuminating

Unit temperature is high.

Turn off vacuum. While unit

is cooling, look for blockages

and remove any that are found.

Filters may also need to be

cleaned.

“EXTENDED” and “MAX

POWER” LEDS are

ﬂashing together

Blockage detected. Turn off

unit and remove blockage.

Headlights are ﬂashing

Brushroll garage is not properly

closed. Close the door by

inserting the tabs on the

lid into the slots in the ﬂoor

nozzle, then pressing down on

the lid, above the headlights,

until both sides click into place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Shark IF200 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Shark IF200

Shark IF200 User Manual - English - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Shark IF200 Manual

Product: