743229

Shark IF200 Manual

28
Zoom out
Zoom in
Previous page
1/112
Next page
ENGLISH
sharkclean.eu53 54
USING THE
FLEXOLOGY™ WAND
WARNING: This
vacuum does not stand
up on its own. Using
the unit when it lacks
stability may result
in personal injury. To
place in Flexology
Storage mode, press the
Flexology Wand button
and gently fold the
handheld vacuum down
toward the floor nozzle.
TIP: The carry handle
located below the
handheld vacuum can also
be used to assist in taking
the vacuum in and out of
Flexology Storage mode.
NOTE: Before vacuuming
your delicate rugs or carpet,
refer to the rug manufacturer’s
recommended cleaning
instructions.
1 To start vacuuming, press the Power button, then recline
the wand to start the brushrolls.
USING THE FLEXOLOGY WAND
To easily access hard-to-reach areas under furniture without
having to bend down, press the Flexology Wand button to
position the wand to a lower angle.
FLEXOLOGY STORAGE
1 Press the Flexology Wand Lock Release button and gently
fold the handheld vacuum forward toward the floor nozzle
until it locks in storage mode. Use the handle to carry the
vacuum to its storage location.
To take the vacuum out of storage mode, press the Flexology
Wand Lock Release button while lifting up the handheld
vacuum. When straightened, the wand will lock in place.
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushrolls are on and
working as they should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
No Light
The brushrolls are off
because the vacuum is off,
or the nozzle is not correctly
connected to the wand or
handheld vacuum.
USING SMART RESPONSE™
TECHNOLOGY
CHOOSING A SUCTION SETTING
There are 2 suction settings:
EXTENDED RUNTIME – For everyday
cleaning.
MAX POWER – Maximum power for
heavy-duty cleaning. (The MAX POWER
setting drains the Lithium ION Power
Pack Batteries faster than EXTENDED
RUNTIME setting.)
SMART RESPONSE TECHNOLOGY
The Smart Response Technology lets you select the ideal power setting and brushroll speed for
each cleaning job.
CHOOSING A SURFACE SETTING
Carpet setting – For cleaning thick
pile carpets. Both brushrolls spin faster,
working together to pick up debris below
the surface of your carpets.
Floor setting – For cleaning hard floors
and short pile carpets. The brushroll and
the Soft Roller both spin together slowly
to gently clean hard floors and short pile
carpets. The Soft Roller traps fine dust and
large particles, while the brushroll directs
that debris to the suction channel.
USAGE
STORAGE
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark IF200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark IF200 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Shark IF200

Shark IF200 User Manual - English - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info