Manual Severin TO 2057 (page 12 of 68) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

602741

Zoom out

Zoom in

1/68

select the desired cooking time.

∙ For overhead baking or grilling, either the

upper or the upper and lower elements

may be selected.

∙ The switch settings (upper heat/lower

heat) may be changed during the cooking

process.

∙ After the pre-programmed cooking time

has elapsed, the timer will automatically

switch off the heating elements.

∙ To switch off the appliance earlier, set the

timer to ‘

’.

∙ Always use the door handle to open

the hot door after use. When removing

the baking tray or rack, use the handle

provided. Always place the baking tray

and rack on a heat-resistant surface.

∙ Remove the plug from the wall socket

after use.

Cooking times

The grilling/cooking times listed are

approximate times only, as each food to

be grilled or cooked is of a different nature

and consistency; please also refer to the

information contained on the food packaging.

Food

Temperature

/ setting

Grilling/

cooking

time

Pizza (deep-

frozen)

200°C

9-10

mins.

Toast Hawaii

220°C

10-14

mins.

Baguette

(deep-frozen)

200°C

14-15

mins.

Cleaning and care

∙ Before cleaning the appliance, ensure it is

disconnected from the power supply and

has completely cooled down.

∙ To avoid the risk of electric shock, do not

clean the appliance with water and do not

immerse it in water.

∙ Do not use abrasives, harsh cleaning

solutions or spray-type oven cleaners.

∙ The exterior of the housing may be

cleaned with a damp, lint-free cloth.

∙ The baking tray and rack may be cleaned

using hot water and a mild detergent, or in

a dish-washer.

∙ The crumb tray may be taken out for

cleaning. Any large accumulation of fat

in the tray should ﬁ rst be cleaned up with

a paper towel. Make sure that the tray

is reﬁ tted in its proper position under the

heating elements.

∙ The inner glass plate of the door may

also be removed for cleaning. Open the

door to the horizontal, loosen the screw

and pull the glass plate out, cleaning

and drying it thoroughly afterwards. To

replace, ﬁ t it between the guide slots in

the glass door, ensuring that it is properly

located above the centre guide slots and

below the two outer slots. When the plate

is replaced, ensure it is the right way up

– ie the open side of the rubber seal (with

the ﬂ ap) downwards against the ﬁ xed

glass plate. Retighten the screw.

Disposal

Devices marked with this symbol

must be disposed of separately

from your household waste, as

they contain valuable materials

which can be recycled. Proper disposal

protects the environment and human health.

Your local authority or retailer can provide

information on the matter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin TO 2057 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin TO 2057 Manual

Product: