after one side is sufficiently browned, and taken out once it is done on both sides, this
process should be closely monitored.
Example: programming the grill function for 30 minutes.
1. Press once. ‘G-1’ is flashing in the display, and the symbol is shown.
2. Press to confirm the grill function.
3. Turn the rotary control until the display shows 30:00.
4. Press to start the grill process. The symbol starts flashing in the display.
Note:
Halfway through the programmed grilling time, a double-beep is heard and the
programme automatically stops; this allows you to turn the food to be grilled. Open the
door, turn the food, then close the door again and press to continue the programme.
Combination functions
When using the combination functions, the microwave, hot/air and grill functions are
activated alternately at different time settings. Using the various combinations helps to
reduce the overall cooking time. These programmes are useful for fish, potatoes, soufflés or
cooking ‘au gratin’.
Function Display Microwave Hot air Grill
Combi 1 C-1 ●●
Combi 2 C-2 ●●
Combi 3 C-3 ●●
Combi 4 C-4 ●●●
1. Press repeatedly until the desired combination function is shown.
2. “C-1”, “C-2”, “C-3” or “C-4” are flashing in the display, in addition, the
corresponding symbols ( , , ) are shown.
3. Press to confirm the selected combination function.
4. Turn the rotary control to select the cooking time.
5. Press to start the cooking process. The corresponding symbol for the selected
function flashes on the display.
The hot-air function
With this function, hot air circulates inside the oven, achieving an even cooking and
browning process. By pressing the key, the cooking temperature can be set within a range
of 150°C and 240°C. The cooking time can be pre-set to a maximum of 95 minutes.
If required, the appliance may also be pre-heated. Select the desired temperature level and
press twice.
Example: the appliance is to be pre-heated to 200°C, followed by a cooking time of 30
minutes.
1. Press 6 times. 200°C starts flashing on the display, and the symbol appears.
2. Press to confirm the temperature setting.
3. Press to start the pre-heating process.
4. The symbol and the illuminated indicator bar start flashing while pre-heating is
in progress.
23
