360126

Severin ks 9893 Manual

19
Zoom out
Zoom in
Previous page
1/124
Next page
– For frequent cleaning we recommend the use of warm water with some mild detergent. To
prevent any unpleasant odour within the refrigerator, it should be cleaned about once a month.
– Any accessories should be cleaned separately with soapy water. Do not put them in a dishwasher.
– Do not use abrasives or harsh cleaning solutions or any cleaning agents that contain alcohol.
– After cleaning, thoroughly clean all surfaces again with fresh water before wiping them
completely dry. When re-inserting the plug into the wall socket ensure that you have dry hands.
– To save energy, the compressor (at the rear) should be cleaned carefully at least twice a year with
a brush or a vacuum cleaner.
– Take care not to remove or damage the rating plate inside the cabinet during cleaning.
De-frosting the freezer compartment:
Once the build-up of ice has reached a thickness of 2-4 mm, the freezer compartment must be
de-frosted. It should be cleaned at least twice a year as described below.
– Ensure that the plug has been removed from the wall socket.
– Remove all food from the compartment, wrap it in newspaper and store it in a cool place to keep
the temperature down. Note that, even with a slight increase in temperature, the storage life will
be shortened and the food should be used as soon as possible.
– Keep the door open. To accelerate defrosting, one or several containers with hot (but not boiling)
water may be placed inside the freezer compartment.
Warning: do not use any external device or other means (e.g. heaters or heating fans) to
accelerate de-frosting.
– After cleaning, ensure that the freezer compartment is thoroughly dry; set the temperature
control to its maximum position. After 24 hours, the temperature control can be set back to its
original position.
Defrosting the refrigerator cabinet
The integral vapouriser is sealed in foam in the rear wall; you may therefore notice a build-up of
frost around the rear area. This layer of frost will start melting when the compressor is not working.
Through a system of hoses, the melt-water drains into the collection tray below the compressor,
where it will be absorbed into the surrounding air. The unit does not therefore require de-frosting,
but only proper cleaning instead.
To ensure proper drainage of the melt-water, keep the drain channel and discharge opening in the
cabinet free from any obstruction or blockage. A suitable pointed object can be used for clearing or
removing a blockage.
19
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin ks 9893 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin ks 9893 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info