Manual Severin ks 9892 (page 14 of 100) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

349185

Zoom out

Zoom in

1/100

4. Carefully lift up the door and place it on a

suitable surface to protect it from scratches.

5. Take off the white plug (7) and re-position it

in the corresponding hole on the right-hand

side, pushing it firmly down.

6. Remove the two threaded bolts (1) securing

the lower hinge plate (2) on the right-hand

side.

7. Take out the left-hand adjustable foot (4) and

fit it on the opposite side.

8. Mount the lower hinge plate (2) in its new

position on the left-hand side, using the

threaded bolts (1). Ensure that the hinge plate

is aligned parallel to the side edge of the

fridge.

9. Replace the door in its new position. Ensure that the lower hinge pin is inserted into the

corresponding guide bush on the door.

10. Mount the upper hinge plate (5) in its new position on the left-hand side, using the two threaded

bolts (6). Ensure that the hinge pin is inserted into the corresponding guide bush in the door.

(Do not fully tighten the bolts yet).

11. Ensure that the door is in its properly closed position before tightening the bolts holding the

lower and upper hinge plates.

12. Open the fridge door, place the top panel (9) on top of the unit and fit the cover plate (8) into the

opening on the right-hand side of the top panel.

13. Replace the screws (10) and screw covers (11) on the top panel (9).

14. Put the unit back in its intended position and wait for about two hours before connecting it to

the mains.

Temperature control

The unit is re-activated by connecting it to the mains. It is only switched off

completely when the plug is removed from the wall socket.

The temperature in the refrigerator cabinet can be adjusted by setting the

temperature control. Turning the control clockwise will decrease the

temperature, while turning it anti-clockwise will increase it.

– After switching on, set the temperature control to its maximum setting.

– After approx. 30 minutes, the setting should be changed to a medium position, usually sufficient

for home or office use.

– Following a power interruption, or if the unit has been disconnected from the mains, there may

be a delay of 3 to 5 minutes before the unit automatically switches on again.

In position ‘0’, the cooling function is switched off, though the appliance is still connected to the

mains.

Interior light

Changing the light bulb:

– Remove the plug from the wall socket.

– Use a suitable screw-driver to remove the screw holding the light cover and take the cover off.

– Take out the defective bulb and fit a new one (max. 15 W).

– Slide the cover back into position, replace the screw and tighten it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin ks 9892 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin ks 9892 Manual

Product: