349185
13
Zoom out
Zoom in
Previous page
1/100
Next page
Familiarisation
1. Top panel
2. Glass shelves
3. Lower glass enclosure
4. Vegetable compartment
5. Adjustable feet
6. Bottle/general storage compartment
7. Temperature control
8. Light
9. Grip recess
Before using for the first time
Remove any exterior and interior packaging materials completely, including the adhesive strips.
Before it is connected to the mains, the unit must be thoroughly checked for transport damage,
including its power cord.
Clean the unit as described in the section Cleaning and de-frosting.
To ensure proper functioning, wait for about 2 hours before connecting the unit and switching it
on after it has been positioned.
When the unit is first switched on, a slight smell may be noticed. However, this will disappear
once the cooling process has begun.
Installation
The appliance should be set up in a well-ventilated, dry room. It should be operated in an ambient
temperature of 16 to 38 °C and a relative humidity of max. 70 %. Do not use the appliance outdoors.
Ensure that the plug is accessible and can be removed from the wall socket at any time. Do not
expose the appliance to direct sunlight, and do not position it next to any heat sources (radiators,
cookers etc). If this cannot be avoided, however, a suitable insulation must be in installed between
the heat source and the unit.
The unit must not be installed inside a cupboard; when positioning the unit, also ensure that it is not
placed directly underneath a shelf or any other similar object.
Ensure that there is sufficient space in front for the door to open to 160°.
If the floor is uneven, the two height-adjustable feet at the front can be used to compensate and
ensure optimum stability. The unit should be installed at a slight angle in such a way that it leans to the
rear: this will ensure that the door will close automatically and cannot be left open by mistake.
Ven ti la ti on
Ensure that there is enough space around the unit so that the air circulation round and behind it is not
obstructed. (Rear and sides 5 cm, top 10 cm.)
Reversible door
If necessary, the door may be reversed, i.e. from right-hinged (default installation) to left-hinged.
Warning: Always disconnect the unit from the mains before any maintenance or repair work is
carried out.
1. Remove the four screw covers (11) and the screws (10).
2. Remove the entire top panel (9), and the cover plate (8).
3. Remove the two threaded bolts (6) securing the upper hinge plate (5) on the right-hand side.
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin ks 9892 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin ks 9892 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info