Manual Severin KS 9774 (page 23 of 152) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

556618

Zoom out

Zoom in

1/152

When de-frosting the freezer compartment

Once the build-up of ice inside the freezer compartment has reached a thickness of 2-4 mm, it needs

to be de-frosted. This should be done at least twice a year.

– Ensure that the plug has been removed from the wall socket.

– Remove all food from the compartment, wrap it in newspaper and store it in a cool place to keep

the temperature down. Note that, even with a slight increase in temperature, the storage life will

be shortened and the food should be used as soon as possible.

– Pull out the drain channel from the freezer cabinet, turn it 180° and

secure it (see diagram). Place a suitable container underneath the

channel outlet.

– Keep the door open. To accelerate defrosting, one or several containers

with hot (but not boiling) water may be placed inside the freezer

compartment.

Warning: do not use any external device or other means (e.g. heaters or heating fans) to

accelerate de-frosting.

– After cleaning, ensure that the freezer compartment is thoroughly dried and set the temperature

control to its maximum position. After 24 hours. it may turned back to its normal setting.

Defrosting the refrigerator cabinet :

The integral vapouriser is sealed in foam in the rear wall; you may therefore notice a build-up of frost

around the rear area. This layer of frost will start melting when the compressor is not working.

Through a system of hoses, the melt-water drains into the collection tray below the compressor, where

it will be absorbed into the surrounding air. The unit does not therefore require de-frosting, but only

proper cleaning instead.

 To enable the melt-water to drain freely, always ensure that the channel and discharge opening in

the cabinet are free of any blockage.

Trouble-shooting

Certain typical sounds can be heard when the appliance is switched on. These sounds are:

– caused by the electrical motor within the compressor assembly;

during compressor start-up the sound level will be slightly higher

for a limited period of time.

– caused by the cooling agent flowing through the circuit.

The following table lists possible malfunctions and their probable causes and solutions. In the event

of operational problems, check first whether a solution can be found using this table. If the problem

persists, disconnect the appliance from the mains power and contact our Customer Service

Department.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin KS 9774 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin KS 9774 Manual

Product: