602817
12
Zoom out
Zoom in
Previous page
1/84
Next page
12
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Do not allow the power cord to hang free;
the cord must be kept well away from hot
parts of the appliance.
No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
Setting the time
Insert the plug into a suitable wall outlet.
The coffee maker is still switched off, with
the LCD display ashing 0000.
To set the time, rst press the PROG key.
The internal clock uses a 24-hour display
format. The current time is set by using
the h button for the hours, while the min
button is used to set the minutes.
Example:
The current time is 15.30 (3.30 pm).
Press the PROG key. The display starts
ashing 00:00, and the h and min buttons
light up blue.
With these buttons showing blue, press the
h button repeatedly (or keep it pressed
for the necessary length of time) until the
display shows 15:00.
Then press the min button repeatedly (or
keep it pressed) until the display shows
15:30.
After 5 seconds or so, the display stops
ashing and the appliance is ready for use.
Timer
To start the brewing process with a
delayed timer setting, the current time
must rst be set as described above.
Then set the timer to the desired time as
follows:
Press the PROG button twice. The LCD
display shows AUTO and the time last
entered, or 00:00.
Use the buttons h und min to set the
desired time.
The pre-set time will now be stored in the
appliance within 5 seconds.
The AUTO button lights up, and the
current and pre-programmed starting time
appear alternately in the display.
At the pre-programmed time, the coffee
maker will automatically switch on.
On/Off button
The On/Off button is used for immediate
starting or stopping of the brewing cycle.
In this case, it is not necessary to set the
current time rst, and if the appliance is
started manually without the current time
set, the LCD display will simply show the
time remaining until the automatic switch-
off.
To interrupt the brewing cycle, press the
On/Off button again.
Aroma function
To obtain a stronger coffee avour, the
appliance is equipped with a special
aroma function. With this setting, the
hot water is released at intervals. This is
especially useful when preparing smaller
quantities of coffee.
To select this function, press the
button. The indicator light comes on.
Automatic switch-off
To save energy, the heating element will
automatically switch off about 40 minutes
after the brewing cycle has been started.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KA 4460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KA 4460 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info