794446
17
Zoom out
Zoom in
Previous page
1/104
Next page
17
142 x 208 mm
For appliances with dust bags
Changing the dust bag
The dust bag can only hold a limited amount of dirt.
Therefore, make sure you change the dust bag if the suction power drops noticeably or the dust level indicator lights up
red:
1. Make sure that the appliance is switched off.
2. Remove the tool and the suction tube.
3. Press the button on the top of the appliance and remove the dust container by pulling it downwards.
4. Remove the cover from the dust container (see Fig. IV).
5. Remove the lled dust bag by pulling it upwards and dispose of it properly.
6. Insert a new dust bag following the direction of the arrow.
7. Replace the cover on the dust container and push it until you hear it click into place.
Attention! The dust container has a safety function that prevents incorrect insertion of the dust bag. If you cannot
mount the dust container back on the appliance, check that the dust bag has been inserted correctly.
8. Push the dust container back into the appliance until you hear it click into place.
Cleaning the HEPA lter
The HEPA lter can get clogged due to soiling, causing the suction power to drop. Make sure you clean the lter on a
regular basis.
At the latest
if the suction power seems to be reduced
before storing the appliance for an extended period
before sending the appliance to the service centre.
Cleaning the lter:
1. Make sure that the appliance is switched off and is not charging.
2. Remove the tool and the suction tube.
3. Remove the HEPA lter cover underneath the handle by turning it counter-clockwise.
4. Pull out the lter.
5. Tap the lter out. If necessary, brush off with a small brush and tap out any loose dust.
6. Slide the lter back in.
7. Replace the cover and lock in place by turning clockwise.
Changing the HEPA lter
When normally used for household purposes, the lter should be replaced every 6 months.
Cleaning the brush roller in the oor tool and the upholstery tool
Soiling may prevent the brush roller from rotating freely. Clean the brush roller regularly.
1. Make sure that the appliance is switched off and is not on charge.
2. Remove the tool from the suction tube.
Floor tool:
3. Press the button on the side of the tool ( ). You can pull the brush roller out of the housing from the side.
4. Remove any hair and dirt from the brush, using a pair of tweezers or scissors carefully, if necessary.
Attention! Carefully use scissors within the brush roller groove to cut away any hair or debris wrapped around the
brush roller.
5. Slide the brush roller back into the tool. To do this, press the red button and slide the brush roller back in from the side
until you hear it click into place.
Upholstery tool:
3. Loosen the locking latch on the side of the tool by turning it counter-clockwise.
4. Remove the brush roller.
5. Remove any hair and dirt from the brush, using a pair of tweezers or scissors carefully, if necessary.
6. Slide the brush roller back into the tool, push it down and lock in place by turning clockwise until the lock engages
above the elevation.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin HV 7187 SEPURO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin HV 7187 SEPURO in the language / languages: All languages as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info