794446
16
Zoom out
Zoom in
Previous page
1/104
Next page
16
142 x 208 mm
Recommended suction mode:
ECO : for slightly soiled hard oors, curtains, drapes and the like
MIDDLE : for slightly soiled carpets, heavily soiled hard oors
POWER : for carpets, rugs, upholstery, mattresses and car seats
TURBO mode : for heavily soiled oor coverings or upholstery
Approximate running time in power modes
With a fully charged battery, the running time is as follows:
ECO : approx. 60 minutes
MIDDLE : approx. 30 minutes
POWER : approx. 12 minutes
TURBO mode : the appliance switches to POWER mode in 2 minutes
Maintaining the appliance
Dust level indicator
The appliance is equipped with a dust level indicator. Make sure you change the dust bag or empty the dust container
when the LED above the display on the handle lights up red.
The LED ashes when the dust bag needs to be changed promptly or the dust container needs to be emptied promptly.
When the LED glows red steadily, the appliance is rendered inoperable and requires prompt change of the dust bag or
emptying of the dust container.
For appliances without dust bags
Emptying the dust container
The dust container can only hold a limited quantity of dirt.
It is therefore highly recommended that you empty the dust container after every cleaning und when the suction power
drops noticeably or when the dust level indicator lights up red:
1. Make sure that the appliance is switched off.
2. Remove the tool and the suction tube.
3. Push the locking latch on the bottom of the dust container. Open the ap of the dust container and empty the dust
container.
4. Close the ap of the dust container.
Cleaning the dust container
You can easily clean the dust container with lter:
1. Make sure that the appliance is switched off.
2. Remove the tool and the suction tube.
3. Press the button on the top of the appliance and remove the dust container by pulling it downwards.
4. Push the locking latch on the bottom of the dust container. Open the ap of the dust container and empty the dust
container. (see Fig. III)
5. Fold the handle (semicircle) back on the dust container lter and remove the lter.
6. Loosen the lter insert with metal sieve by turning it and then remove it.
7. Pull out the foam lter and brush it off carefully if necessary.
8. All lter parts should be rinsed with lukewarm water and allowed to dry for 24 hours.
9. The dust container should be rinsed with lukewarm water and allowed to dry for 24 hours with the lid open.
10. We recommend that you dry the parts on a radiator. Make sure that the parts are completely dry before reassembling
them.
11. Replace the dry foam lter, attach the lter insert with metal sieve and turn to lock in place.
12. Slide the lter back into the dust container. The locking tab on the lter must t into the dust container recess.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin HV 7187 SEPURO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin HV 7187 SEPURO in the language / languages: All languages as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info