Manual Severin BM-3987 (page 22 of 156) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

712440

Zoom out

Zoom in

1/156

Once the bread or dough is ready, a multiple acoustic signal is heard and the time display

shows 0:00. Press the button for at least 2 seconds and open the lid.

Carefully remove the baking-tin using an oven cloth. Do not place the hot baking-tin on

any heat-sensitive surfaces. Should you forget to press the button, and not remove

the bread immediately, it will still be kept warm automatically for a period of 60 minutes.

This is to ensure that no condensation can collect in the baking-tin.

Remove the bread from the baking-tin. To loosen the bread, it

may be lightly shaken. Should the dough hook be stuck in the

bread, it should be removed carefully. To avoid damage or

scratches to the non-stick coating, do not use any metallic or

otherwise unsuitable objects.

To allow the underside of the loaf to cool down as well, it

should be placed on a suitable wire rack. Do not attempt to cut

the bread until it has sufficiently cooled down.

CLEANING AND CARE

● Caution: before the appliance is cleaned, ensure it is switched off, disconnected from the

power supply and has cooled down completely.

Do not immerse the bread-maker in water.

Remove the baking-tin from the appliance, and take out the dough hook.

The baking-tin and the dough hook may be cleaned using hot water and a mild

detergent. Do not use any rough material for cleaning. If you are unable to separate the

dough hook from the baking tin using normal force, let it soak in lukewarm water for

approximately 30 minutes. Do not use excessive force to remove the hook.

● To prevent damage to the drive-shaft seal, the baking-tin should not be left soaking for

any extended period of time. Do not clean the baking-tin in a dish-washer.

The inside of the lid may be cleaned with a slightly damp, soft cloth. The interior of the

appliance should be cleaned with a soft, dry cloth.

● Do not use cleaning agents specifically designed for baking ovens, and do not use any

abrasives or harsh cleaning solutions, vinegar or bleaching agents for cleaning.

● Before storing the appliance, always ensure that it has cooled down and that it is

completely dry.

TYPICAL PROBLEMS

1. The bread has a strong smell.

Check whether the correct amount of yeast was used. Too much yeast causes an

unpleasant smell and makes the loaf rise too much. Always use fresh ingredients.

2. The baked bread is wet and has a sticky surface.

Remove the bread from the appliance immediately after baking, and place it onto a wire

rack, allowing it to cool down.

3. Pressing the Start button fails to activate the selected programme.

Make sure that the unit is properly connected to the mains supply, and that the unit is

switched on.

Should the appliance still be too hot after a previous work cycle, an automatic safety

switch prevents the appliance from resuming operation. In that case, the LED display

shows the letters HHH, and a continuous acoustic signal is heard. Press the button

for 2 seconds, and remove the baking-tin with the ingredients from the unit. Allow the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin BM-3987 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin BM-3987 Manual

Product: