Seite 24
10.2 Satellite List
This feature provides a listing of all the stored
Satellites and enables the user to SCAN, EDIT,
ADD or DELETE them. In addition there are
another two soft keys providing access to SCAN
OPTIONS and a BLIND SCAN FUNCTION.
Using the CH+- buttons scroll down to
SATELLITE LIST and press OK.
• RED Button - Scan: Use the CH+- button to
select the Satellite you wish to scan. Press
the RED Button to initiate a SCAN on the
selected Satellite.
• YELLOW Button – Edit: Pressing the
GREEN button enables the following
parameters of the selected Satellite to be
edited: SAT NAME, LONGITUDE, EAST/
WEST, LNB TYPE,LNB LOW, LNB HIGH,
DiSEqC. Use the numeric keys and the VOL+-
to edit. Then press EXIT and OK to save your
changes.
• GREEN Button – Add: Add a new Satellite.
Using the CH+-, VOL+- and the numeric
keys edit the SAT NAME, LONGITUDE,
EAST WEST, LNB TYPE, LNB LOW, LNB
HIGH,DiSEqC settings. Then press EXIT and
OK to save your changes.
• BLUE Button – Delete: Use the CH+- keys
to select the Satellite you wish to delete the
press the BLUE button and OK to conrm.
WARNING,USE WITH CAUTION – The
Satellite will be permanently deleted.
• INFO Button - Scan Option: Refer to section
for SCAN OPTION settings.
10.3 Transponder List
This feature lists all the Transponders on the
currently selected Satellite and enables the
user to SCAN, EDIT, ADD or DELETE them. In
addition there are another two soft keys providing
access to the SATELLITE LIST and SCAN
OPTIONS. Using the CH+- buttons scroll down to
TRANSPONDER LIST and press OK.
• RED Button - Scan: Use the CH+- button
to select the Transponder you wish to scan.
Press the RED Button to initiate a SCAN on
the selected Satellite.
• YELLOW Button – Edit: Pressing the
GREEN button enables the following
parameters of the selected Transponder to
be edited; FREQUENCY, SYMBOL RATE,
POLARITY, N-PID and T-PID. Use the
numeric keys and the VOL+- to edit. Then
press EXIT and OK to save your changes.
• GREEN Button – Add: Add a new
Transponder. Using the CH+-, VOL+- and
the numeric keys edit the FREQUENCY,
SYMBOL RATE, POLARITY, N-PID and T-PID
settings. Then press EXIT and OK to save
your changes.
• BLUE Button – Delete: Use the CH+- keys
to select the Transponder you wish to delete
then press the BLUE button and OK to
conrm. WARNING, USE WITH CAUTION –
The Transponder will be permanently deleted.
• INFO Button - Scan Option: Refer to section
for SCAN OPTION settings.
• OK Button - Satellite List: Lists all the
Satellites. From here you can select a
different satellite and view the associated
Transponders.
