504972
21
Zoom out
Zoom in
Previous page
1/34
Next page
Seite 21
A USB Device can be connected to either the
front mounted USB Port located on the front of
your Receiver or to the second Port on the rear
of the unit. Compatible devices are USB Memory
Sticks*and most types of USB HDD* devices
You can use the USB device to: play les, play
games, record programmes and update the
MENU and then using the CH- button scroll
down to USB MODULE and press OK. Available
functions are MULTIMEDIA, SOFTWARE
UPGRADE, DATABASE BACKUP,DATABASE
UPDATE, PVR PARTITION SELECT and PVR
PREVIEW. Use the CH- button to select your
desired function and then press OK..
Installation Tip: Why not permanently install
an external hard drive to the rear USB port as
your main drive for recording TV programmes
whilst using the front USB port to play media
from your USB stick. The front USB port
automatically overrides the rear one when
you plug a USB stick in!
9.1 Multimedia
NOTE: You can access this feature directly
by pressing the MEDIA button on the remote
Control.
This feature enables you to playback a variety of
music and video les for your enjoyment. When
you have entered the MULTIMEDIA function a
screen will be displayed as shown with a number
of options as follows:
Movie – To playback MPEG1/4 and AVI
Videos
Music – Plays back MP3 music les
Photo – Plays both JPEG and Kodak image
les
Movie: Use the VOL+- buttons to select
MOVIE. Press OK. A list of compatible music
les will be shown. Use the CH+- buttons
to select the le you wish to play and press
OK. Press the RED button to display FULL
SCREEN. All the PLAY controls can be
used, note that the PREVIOUS and NEXT
buttons will move you to the previous or next
recordings within a folder. You can also use
the GOTO command by pressing the BLUE
button and then entering the time you wish to
jump to in the pop up counter. When you have
entered the time as “00:00:00” format press
OK to jump to your chosen point in the le.
The REPEAT A-B function only works in full
screen playback. Press the GREEN (Repeat
AB) button to set the “A” start point, press
the GREEN (Repeat AB) button when you
have reached the “B” stop point you desire.
The loop will then replay repeatedly until you
press the GREEN (Repeat AB) button for a
third time.
Music: Use the VOL+- buttons to select
MUSIC. Press OK. A list of compatible video
les will be shown. Use the CH+- buttons to
select the le you wish to play and press OK.
All the PLAY controls can be used as normal,
i.e., FF, FR, NEXT TRACK, PREVIOUS
TRACK etc. You can also use the GOTO
command by pressing the BLUE button and
then entering the time you wish to jump to in
the pop up counter. When you have entered
the time as “00:00:00” format press OK to
jump to your chosen point in the le.
Photo: Use the VOL+- buttons to select
PHOTO. Press OK. A list of compatible image
les will be shown. If you wish to see all the
images as a slide show then press the PLAY
/ PAUSE button to start the show (to alter the
transition time see SETUP below) If you wish
to view the images one by one then use the
CH+- buttons to select the le you wish to
play and press OK to view full screen. Press
the NEXT and PREVIOUS buttons to move
backwards and forwards through the available
images.
9.2 Software Upgrade
This feature is not currently available but may be
utilised in future software versions.
9.3 Database Backup
This feature enables a back up of all your
Channel Information to be taken which can
then be used to restore the information should it
become lost or corrupted. The Database Backup
File is always stored in the rst partition of the
USB Device connected to the rear USB Port in a
folder named “Database”. Press CH+- to select
DATABASE BACKUP then press OK. The back
up le will then be created automatically.
9. USB
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SetOne TX-8300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SetOne TX-8300 in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info