651323
5
Zoom out
Zoom in
Previous page
1/12
Next page
5
Signals
Your electronic-lock safe communicates by means of
several audio/visual signals.
Red (Error) LED + three beeps indicates one
of the following:
1. You have pressed Program key out of sequence.
2. You have entered an invalid code or user pin.
3. You have let 5 seconds or more elapse between
key presses.
4. Lights after three consecutive invalid codes are
input (2-minute delay mode).
Green LED only:
1. Comes ON after you enter a valid code and
remains lit during the 4-second period in which
the safe can be opened.
2. Comes ON in the Programming mode and remains
lit until you have finished entering a 5-digit code.
Yellow LED only:
1. Comes ON when the batteries need to be replaced.
Delay mode
The lock automatically enters a 2-minute Delay
mode after an invalid code has been entered three
consecutive times. In this mode, the lock cannot be
activated and any key entry will generate an ERROR
signal.
Gaining Entry into Safes with Electronic Locks
Sentry Group Customer Care
Using the keypad on electronic safes
Caution! Liquids can damage the keypad!
Caution! Pen points or other sharp objects
can puncture the keypad membrane!
Fire ratings
To be sure your safe performs as rated and complies
with its ratings, remove it from the pallet before
installation.
ETL verified fire claim for all models
except GM1055C/E + EM1055E
Verified by ETL SEMKO to meet manufacturers
specification for fire resistance 1400°F (760°C) for
30 minutes endurance.
ETL verified fire claim for
GM1055C/E + EM1055E
Verified by ETL SEMKO to meet manufacturers
specification for fire resistance 1200°F (649°C) for
20 minutes endurance.
Lost keys or combination
First, find your safe’s Serial Number. The Serial
Number is printed on the small label on the right
side and the back side of the safe (outside). Send
this and a check or money order for $15.00 (U.S.
funds) ($15.00 for keys and $15.00 for combina-
tions). Please include a written statement of owner-
ship witnessed and signed by a notary public or
bank official. The notary must have a different last
name than the owner.
Mail to: Sentry Group, Dept. 200, 882 Linden
Avenue, Rochester, NY 14625-2784, USA, or fax
statement (notary seal must be legible) to 1-585-
381-2940. Payment may also be made using your
VISA or Mastercard credit card by phone only. Call
1-800-828-1438 to make credit card payment. Do
not fax credit card information.
NOTE: Prices subject to change without prior
notification.
WARNING!
DO NOT store your safe on the pallet on which it was shipped.
SentrySafe gun safes which are ETL-tested and verified, will not comply with their ratings if the safe is stored on the
shipping pallet.
WARNING!
If children live or visit in your home, do not leave your SentrySafe Gun Safe or
Executive Safe open and unattended. Children at play could accidentally be locked inside the safe.
Keep your safe closed and locked at all times.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentry EF3428E - Executive Fire-Safe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentry EF3428E - Executive Fire-Safe in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info