753055
38
Zoom out
Zoom in
Previous page
1/56
Next page
Installation instructions, for professionals only p. 10/27
4.1. Installing the sauna control unit
Refer to Fig. 1 (page 11).
1. Press the clip lock 6 lightly using a screwdriver and remove the cover
from the housing.
2. Screw one cross-head screw (20 mm) into the wall of the sauna
at a height of approx. 1.70 m with a clearance of up to 7 mm.
3. Hang the sauna control unit onto the cross-head screw using
the attachment device c as an aid.
4. Guide the sensor wires through the cable bushing 4.
5. For the optional door monitor only:
Guide the wires for the door monitor through the cable bushing 2.
6. Guide the heater, power supply and light cables through
the cable bushing 7.
7. Screw two cross-head screws (20 mm) into the lower fastening
holes 3 and 8.
8. Ensure that the sauna control unit is tted securely.
4.2. Connecting wires
Refer to Fig. 1 (page 11) and Fig. 3 (page 17).
1. Connect the white wire for the sensor heater to terminal F1 on the termi-
nal strip 1; it is not necessary to ensure correct polarity.
2. Connect the red wire for the sensor heater to terminal TS on the terminal
strip 1; it is not necessary to ensure correct polarity.
3. For the optional door monitor only:
Remove the jumper wire from the terminal DR on the terminal strip 1
and connect the wires for the door monitor.
4. For the optional bench sensor only:
Remove the jumper wire from terminal F2 to terminal strip 1 and clamp on
the lines of the bench sensor; it is not necessary to ensure correct polarity.
5. Connect the heater, power supply and light cables (Fig. 3) to the terminal
strip 9 in accordance with the connection diagram.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec A2-15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec A2-15 in the language / languages: English, German as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info