471985
20
Zoom out
Zoom in
Previous page
1/46
Next page
Using the transmitter
18
When the transfer is completed, the display
panel of the transmitter displays the
numbers of the transferred frequency bank
and channel.
Please note that the transmitter does not
automatically store the frequency bank and
channel setting.
When the transfer is completed, “
appears on the display panel of the
transmitter. The transmitter then switches
back to the standard display.
The transferred parameters are
automatically adjusted and stored by the
receiver. The transmission link between
transmitter and receiver is now established.
̈ Place the infra-red interface of the
portable receiver in front of the infra-red
interfaces of the remaining transmitters,
one after the other.
In each case, the next unused frequency
preset is transferred from the receiver to
the transmitter.
̈ Store the frequency bank and channel
setting by pressing the jog dial on your
transmitters. The RF signal is activated.
You can carry out the Sync function (see
right-hand column) at a later time to
establish a transmission link between
transmitters and receivers.
OR:
̈ Immediately synchronize your receivers
with your transmitters by carrying out
the Sync function (see right-hand
column).
This establishes a transmission link
between transmitters and receivers.
The icon in the left lower corner of
the transmitter display indicates that the
Sync function can be carried out.
To cancel the transfer:
̈ Press the STANDBY button on the
transmitter.
” appears on the display panel of the
transmitter. “ ” also appears if no
suitable receiver was found.
Easy Setup Sync Sync
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 300 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info