471985
19
Zoom out
Zoom in
Previous page
1/46
Next page
Using the transmitter
17
Sync function (SR 300 IEM G3 -> EK 300 IEM G3)
On the other hand, you can use the Sync function to adjust settings for your EK 300 IEM G3
portable receiver directly on your SR 300 IEM G3 rack-mount transmitter and transfer these
settings to the receiver via the infra-red interface (see page 30).
Carrying out an Easy Setup Sync or a Sync function
The following assumes that you are using the Easy Setup Sync function for setting up a multi-
channel system. You can also you the Easy Setup Sync function for establishing a
transmission link between one transmitter and one EK 300 IEM G3 receiver.
When carrying out the Sync function, the transmitter’s current frequency bank and
channel setting is automatically transferred to the receiver via the infra-red
interface.
Easy Setup Sync Sync
̈ Switch all rack-mount transmitters and
one portable receiver on.
̈ Switch your rack-mount transmitter and
your portable receiver on.
̈ On all transmitters, call up the “Easy
Setup” menu item.
The text “Easy Setup Sync” and the
icon appear on the display panels of the
transmitters.
The RF signal of the transmitters is
automatically deactivated.
̈ Press the button » on the
transmitter.
The icon appears on the display
panels of the transmitter.
̈ Use your EK 300 IEM G3 portable receiver
to perform a frequency preset scan.
̈ Select a frequency bank with a sufficient
number of unused channels (see the
instruction manual of the receiver).
̈ Place the infra-red interface of the
receiver (see the instruction manual of
the receiver) in front of the infra-red
interface ¿ of the first transmitter.
The first unused frequency preset is
transferred from the receiver to the
transmitter.
̈ Place the infra-red interface of the
receiver (see the instruction manual of
the receiver) in front of the infra-red
interface ¿ of your transmitter.
The parameters adjusted via the “Sync
Settings” menu item are transferred
from the transmitter to the receiver.
In addition, the current frequency bank
and channel setting is transferred.
OFF
2
4
6
PHONES
¿
OFF
2
4
6
PHONES
¿
»
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 300 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info