471993
11
Zoom out
Zoom in
Previous page
1/44
Next page
Putting the transmitter into operation
9
Connecting and positioning a remote antenna
Use a remote antenna when the transmitter position is not the best antenna position for
optimum transmission. You can choose between two antennas (see “Accessories” on
page 34):
A 2003 UHF passive directional broadband antenna
A 1031 passive omni-directional broadband antenna
̈ Use a low-attenuation 50- cable to connect the antenna to the transmitter.
̈ If possible, use a short antenna cable and as little connections as possible, since long
cables and many connectors lead to an attenuation of the antenna signal.
̈ Position the antenna in the same room in which the transmission takes place.
̈ Observe a minimum distance of 1 m between the antenna and metal objects (including
reinforced concrete walls).
Connecting several transmitters to a remote antenna
To make multi-channel systems, you should use the AC 3200 antenna combiner (optional
accessory). The AC 3200 allows you to operate up to eight transmitters with a single antenna
without virtually any intermodulation.
̈ Connect the AC 3200 antenna combiner to the BNC socket ƽ.
Connecting the rod antenna to the rear of the transmitter
The supplied rod antenna ƾ is suitable for all applications where the transmitter is to be put
into operation without a large amount of installation work.
̈ Connect the rod antenna ƾ to the BNC socket ƽ.
Mounting the antennas to the front of the transmitter
To mount the antenna connections to the front of the transmitter, you require the
GA 3030 AM antenna front mount kit (optional accessory). The GA 3030 AM consists of:
You can connect several transmitters to the same remote antenna (see next section).
ƾ
ƽ
ƽ
ƾ
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 2050 in the language / languages: English as an attachment in your email.

The manual is 8,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info