471993
10
Zoom out
Zoom in
Previous page
1/44
Next page
Putting the transmitter into operation
8
Putting the transmitter into operation
Setting up the transmitter on a flat surface
̈ Clean the base of the transmitter where you want to fix the device feet.
̈ Fit the device feet to the four corners of the transmitter.
̈ Place the transmitter on a flat, horizontal surface. Please note that the device feet can
leave stains on delicate surfaces.
Mounting the transmitter into a 19" rack
̈ Slide the transmitter into the 19" rack.
̈ Secure the rack mount “ears” ³ to the rack using four screws (not included in the
delivery).
Connecting the antennas
You have the following options:
For professional use, we recommend connecting a remote antenna and, if necessary, using
Sennheiser antenna accessories (see next section and the chapter “Connecting several
transmitters to a remote antenna” on page 9).
If the transmitter is to be put into operation without a large amount of installation work,
you can:
connect the supplied rod antenna to the rear of the transmitter (see page 9) or
use the optional GA 3030 AM antenna front mount kit (see page 9).
Do not fit the device feet when mounting the transmitter into a 19" rack.
CAUTION! Risks when rack mounting the transmitter!
When installing the device in a closed or multi-rack assembly, please consider that, during
operation, the ambient temperature, the mechanical loading and the electrical potentials will
be different from those of devices which are not mounted into a rack.
̈ Make sure that the ambient temperature within the rack does not exceed the permissible
temperature limit specified in the specifications.
̈ If necessary, provide additional ventilation.
̈ Make sure that the mechanical loading of the rack is even.
̈ When connecting to the power supply, observe the information indicated on the type
plate. Avoid circuit overloading. If necessary, provide overcurrent protection.
̈ When rack mounting, please note that intrinsically harmless leakage currents of the
individual mains units may accumulate, thereby exceeding the allowable limit value. As a
remedy, ground the rack via an additional ground connection.
PEAK
-10
0
-20
-30
-40
PE
A
-1
0
0
-2
0
-3
0
-4
0
AF I
AF
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 2050 in the language / languages: English as an attachment in your email.

The manual is 8,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info