471992
15
Zoom out
Zoom in
Previous page
1/44
Next page
Using the transmitter
13
̈ Pass the mains cable through the cable grip µ.
̈ Connect the mains cable to the mains socket ¾.
̈ Plug the mains plug into the wall socket.
Using the transmitter
To establish a transmission link, proceed as follows:
1. Switch the transmitter on (see next section).
2. Switch the
EK 2000 IEM
receiver on (see the instruction manual of the receiver).
The transmission link is established.
If you cannot establish a transmission link between the transmitter and the EK 2000 IEM
receiver, read the chapter “Synchronizing the transmitter with the EK 2000 IEM receiver” on
page 30.
Switching the transmitter on/off
To switch the transmitter on (online operation):
To switch the transmitter on and to deactivate the RF signal on switch-on (offline operation):
To activate the RF signal:
50/60Hz 0.2 A ETHERNET RJ-45
B
100 - 240V
¾
µ
It is vital to observe the notes on frequency selection on page 30.
0**
º
̈ Briefly press the STANDBY button º.
The transmitter switches on and the standard display appears.
The transmitter transmits an RF signal and the transmission icon
is displayed
.
̈ Keep the STANDBY button º pressed untilRF Mute On?” appears on the display
panel.
̈ Press the jog dial.
The transmission frequency is displayed but the transmitter does not transmit an
RF signal. The transmission icon
is not displayed. In addition, the display
backlighting changes from orange to red and “RF Mute” flashes in alternation
with the standard display.
Use this function to prepare a transmitter for use during live operation without
causing interference to existing transmission links.
̈ Press the STANDBY button º.
RF Mute Off?” appears on the display panel.
Standard -18dB
MHz
PEAK
-10
0
-20
-30
-40
PEAK
-10
0
-20
-30
-40
AF II
AF I
**2000**
552.300
B.Ch: 5.14
EQ
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 2000 in the language / languages: English as an attachment in your email.

The manual is 8,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info