471992
14
Zoom out
Zoom in
Previous page
1/44
Next page
Putting the transmitter into operation
12
̈ Connect the output socket LOOP OUT BAL R(II) ƹ of transmitter A to the input socket
BAL AF IN R(II) ƻ of transmitter B.
̈ Connect the output socket LOOP OUT BAL R(II) ƹ of transmitter B to the input socket
BAL AF IN R(II) ƻ of transmitter C.
̈ Repeat for the other transmitters.
Connecting devices to the output sockets
̈ Use a suitable cable to connect the audio input of a device (e.g. a mixing console or an
additional SR 2000 IEM or SR 2050 IEM) to the output socket LOOP OUT BAL L (I) Ƹ and/
or LOOP OUT BAL R (II) ƹ (see also preceding chapter).
Connecting transmitters in a network
You can connect several transmitters in a network. The transmitters are remote controlled via
a PC running the “Wireless Systems Manager” (WSM) software. This software will assist in
the quick and safe configuration of multi-channel systems.
̈ Connect a standard network cable (at least Cat 5) to the LAN socket ¹ of the transmitter.
̈ Connect your transmitters to an Ethernet switch.
̈ Connect a PC to the Ethernet switch.
When a transmitter is properly connected to the Ethernet switch or the PC, the yellow
LED ¸ at the rear of the transmitter lights up.
For further information on network operation using the WSM, refer to page 30.
Connecting the mains cable
The AF output sockets LOOP OUT BAL L(I) Ƹ and/or LOOP OUT BAL R(II) ƹ will work
only when the transmitter is switched on and powered.
ETHERNET RJ-45
B
RF OUT
ANT B
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 627945
SER NO 251810043
FMO
IC 2099A-SR20x0
Stereo Transmitter SR 2000 IEM
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095
IC 2099A-SR20x0
L(I)
R(II)
+22dBu
MAX
Loop Out A
BAL
Ƹƹ
ƺ
The signal received from the AF input sockets BAL AF IN L(I) ƺ and BAL AF IN R(II)
ƻ is actively buffered and then routed to the output sockets LOOP OUT BAL L(I) Ƹ
and LOOP OUT BAL R(II) ƹ. The AF output sockets will therefore work only when the
transmitter is switched on and powered.
The “Wireless Systems Manager” (WSM) software can be downloaded from our
website at www.sennheiser.com.
ETHERNET RJ-45
RF OUT
ANT B
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 627945
SER NO 251810043
FMO
IC 2099A-SR20x0
Stereo Transmitter SR 2000 IEM
DESIGNED AND MADE IN GERMANY
FREQ RANGE-Dw
790-865 mHz
ART NO 503841
SER NO 2518100095
IC 2099A-SR20x0
L(I)
R(II)
+22dBu
MAX
Loop Out A
BAL
¹¸
CAUTION! Damage due to electric current!
If you connect the transmitter to an unsuitable power supply, this can cause damage to the
device.
̈ Use the supplied mains cable to connect the transmitter to the mains (100 to 240 VAC,
50 or 60 Hz).
̈ Ensure a reliable mains ground connection of the transmitter – especially when you are
using multi-outlet power strips or extension cables.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 2000 in the language / languages: English as an attachment in your email.

The manual is 8,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info