575962

Sennheiser EMP 2015 Soundfield System Manual

26
Zoom out
Zoom in
Previous page
1/34
Next page
62
Configuring a frequency memory
Transmitter and receiver section of the Soundfield System have 16 switchable
frequency memories respectively to store up to 16 transmission and receiving
frequencies. The 16 factory-preset transmission/receiving frequencies are all
intermodulation-free, i.e. you could operate up to 16 transmission links
simultaneously in the same room.
If you use more than 16 Soundfield Systems in neighboring rooms, a
minimum spacing of 400 kHz between two carrier frequencies must be
maintained. Within the 32 MHz frequency window, you can therefore operate
up to 80 systems without having to use a frequency twice.
Note:
In contrast to the Soundfield System, standard FM systems operate in the
VHF band so that both systems cannot interfere with each other.
Operating steps for configuring a frequency memory
1. Select a frequency memory
Ǡ Press the ̆/̄ buttons to select a factory-preset fixed frequency memory.
The display starts flashing. Your selection becomes effective immediately.
Ǡ Press the SET button to acknowledge your selection. The display stops
flashing. (If the SET button is not pressed, the device will store the new
setting automatically on turn-off.)
Note:
You can choose the content of the standard display i.e. whether the
frequency or the channel number is displayed (u “Selecting the content
of the standard display”). The devices are factory-preset to show the
frequency setting as standard.
2. Select a different frequency
Ǡ Press the SET button three times to select the “tunE” menu. “tunE” appears
on the display; after a short pause the currently set frequency is indicated.
Ǡ With the ̆/̄ buttons you can now select a different frequency. The
frequencies are tunable in 25-kHz steps. The new frequency starts flashing
on the display and becomes effective immediately.
Ǡ Press the SET button to return to the top menu level. The display then
switches back to the standard display.
Important note:
Set the transmitter AND the receiver to exactly the same frequency!
tunE
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser EMP 2015 Soundfield System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser EMP 2015 Soundfield System in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info