575962

Sennheiser EMP 2015 Soundfield System Manual

25
Zoom out
Zoom in
Previous page
1/34
Next page
61
SqELCH
DiSPL
Adjusting the squelch threshold (receiver section only)
The amplifier’s receiver section is equipped with an adjustable squelch which
eliminates annoying noise when the transmitter is turned off. It also suppresses
sudden noise when the transmitter leaves the reception area.
Ǡ Press the SET button to select the “SqELCH” menu. “SqELCH” appears on
the display; after a short pause the current squelch setting is indicated.
Ǡ With the ̆/̄ buttons you can now select a different setting. The squelch
can be turned off (0 dB) or adjusted in 5-dB steps from 5 dB to 40 dB.
(Selecting a smaller value reduces the squelch threshold, selecting a higher
value increases the squelch threshold.) The new setting starts flashing on
the display. Set the squelch threshold – with the transmitter turned off –
to the lowest possible value that suppresses hissing noise. With the squelch
set to a high value, the receiver section will be less sensitive to interference
but, on the other hand, the transmission range will be reduced.
Note:
If the receiver’s squelch is set to “0 dB” and you turn the transmitter off,
hissing noise with high dynamics will occur.
Ǡ Press the SET button to return to the top menu level. The display then
switches back to the standard display.
Selecting the content of the standard display
With both transmitter and receiver section you can choose the content of the
standard display i.e. whether the frequency (in MHz) or the channel number
is displayed.
Ǡ Press the SET button twice to select the “DiSPL” menu. “DiSPL” appears
on the display; after a short pause the current setting is indicated.
Ǡ With the ̆/̄ buttons you can now choose between:
Frequency: “FrEqu”
Channel number: “ChAnnL”
The new setting for the standard display starts flashing on the display.
Ǡ Press the SET button to return to the top menu level. The display then
switches to the new standard display.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser EMP 2015 Soundfield System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser EMP 2015 Soundfield System in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info