759526
6
Zoom out
Zoom in
Previous page
1/19
Next page
EN - 6
WIRELESS SENSOR SIGNAL RECEIVING
1. In normal mode, press [SENSOR] key once to start receiving the sensor signal of
currentondisplayingchannel.Thesignaliconwillash.
For example, when CH 2 is displayed, pressing [SENSOR] key will start receive for
CH 2 only.
2. Thesignaliconwillashuntilthereceptionsucceeded.Ifnosignalisreceivedwithin
5 minutes the icon will disappear.
Receiving wireless signal after manual reset or the [SENSOR] key is pressed
D/M M/D
M/ D
Whenwaitingforsignals,“--”willdisplayinthereadingseld
D/M M/D
M/ D
Good wireless sensor signal
1. If the signal for the current channel has discontinued
and does not recover within 1 hour, the signal icon will
disappear.
The temperature and humidity will display “Er” for the
corresponding channel.
2. If the signal does not recover within 48 hours, the “Er
display will become permanent you need to replace
the batteries of “Er” channel’s sensors and then press
[SENSOR] key to pair up the sensors of each “Er” channels
again.
NOTE:
After replacing the batteries of the wireless sensor or the unit fails to receive wireless
sensorsignalofaspeciedchannel.Duringthefailedchannelisdisplaying,press
[SENSOR] key to manually receive that sensor signal again.
VIEW CHANNEL OF MULTIPLE WIRELESS SENSORS
This main unit can support up to 8 additional wireless sensor(s).
1. If you buy the additional wireless sensor(s) and paired with the main unit. Then, you
can press [CH / +] key to switch the display between CH 1~8.
2. In normal mode, press and hold [CH / +] key for 2 seconds to enter auto-cycle mode,
after a bi sounds, it will alternately displays the channels at 4 second intervals.
3. During auto-cycle mode, press [CH / +] key once to stop auto-cycle and display the
current channel.
4. Using auto-cycle mode will only display the communicated channels. For example,
when CH 1 and 6 have received the signal from the corresponding sensor, press and
hold [CH / +] key for 2 seconds will only toggle the readings of CH 1 and 6. Other
channels will be neglected.
D/M M/D
M/ D
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SWS 7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SWS 7300 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info