759526
5
Zoom out
Zoom in
Previous page
1/19
Next page
EN - 5
NOTE:
- The bundled wireless sensor can receive the Radio controlled clock signal for main
unit auto time setting. Just pair up the sensor with main unit to apply this function.
- Once the channel is assigned to a Wireless Hygro-Thermo sensor, you can only
change it by removing the batteries or resetting the unit.
- Avoid placing the sensor in direct sunlight, rain or snow.
MAIN UNIT
Install backup battery
1. Remove the battery door of the main console.
2. Insert the new CR2032 battery as per the polarity information marked on the battery
compartment
3. Close the battery door.
Power up console
1. Plug the power adapter USB plug to
power up the main unit.
2. Once the main unit power up, it will enter
normal time mode.
D/M M/D
M/ D
USB cable
TABLE STAND INSTALLATION
The unit is designed for desktop or wall mount for easy viewing. follow the steps below to
hook the table stand on the botton of the console.
D/M M/D
M/ D
Step 1 Step 2
NOTE:
- If no display appears on the LCD, press the [RESET] key by using a metal wire.
- To avoid the wireless sensor and main unit pairing fail, please power up the sensor(s)
rst,andthenpress[RESET] key in main unit after sensor setup.
- You may not receive the signal immediately. Due to the atmospheric disturbance, the
best reception often occurs during night time.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SWS 7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SWS 7300 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info