759443
10
Zoom out
Zoom in
Previous page
1/14
Next page
EN-10
EN
Vacuum Cleaner
SVC 610RD / SVC 611BL
Copyright © 2016, Fast ČR, a.s. Revision 02/2016
F
1
2
3
4
1 Dust container lid
2 Dust container
3 H.E.P.A. filter
4 Foam pre-filter
Emptying the dust container F2
Disconnect the hose Aqh from the vacuum cleaner.
Press the dust container release button A3 (power control button) > then pull upwards to remove
the dust container A2 by its handle F4.
Place the dust container F2 over a waste bin.
Press the safety clip under the hose socket on the container – its tilt out bottom will open.
Release the lid clip above the filter – the removable lid will open. Tip the dust and dirt into standard
household waste.
Place the dust container F2 back into the vacuum cleaner.
Caution:
Before reinserting the dust container F2, make sure that the container is completely dry.
Tip
We recommend to wash the dust container F2 under lukewarm running water.
Replacing and cleaning filters
Replacing the outflow filter
Push down the clip on the filter grill to remove it by tilting it out. Remove the filter and reinsert a new
filter. Then reinsert the grill with the filter back into the vacuum cleaner.
Caution:
Put the filter in the vacuum cleaner with the plastic grill facing outwards!
Cleaning the filters
All filters in the vacuum cleaner are washable. When soiled, wash them under lukewarm running water.
When the filters are so heavily clogged that cleaning does not help, replace them for new ones. Before
reinserting the filters into the vacuum cleaner, make sure that they are completely dry.
Caution:
The vacuum cleaner is equipped with a thermal fuse, which will automatically be engaged when
the vacuum cleaner is overloaded (e.g. when filters are clogged). It is then only possible to start
the vacuum cleaner again after it has cooled down. For this reason, carry out regular cleaning,
i.e. replace the filters – this will extend the lifespan of the vacuum cleaner!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVC 610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 610 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info