759450
6
Zoom out
Zoom in
Previous page
1/6
Next page
- 6 - 09/2020
Copyright © 2020, Fast ČR, a.s.
Attention:
Never insert the filters back into the vacuum cleaner if they are
wet or damp! Always wait until they are thoroughly dry.
Replacing the outflow filter
First remove the grill of the outflow filter A28 by pulling it away from the vacuum
cleaner in the location of both safety clips.
Then remove the outflow filter A27 and replace it with anew one.
After reinserting the filter A27, put on the grille of the outflow filter A28 and click
it in behind both the clips.
Attention:
Make sure you put the outflow filter A27 in the vacuum cleaner
with the plastic grill facing outwards!
Cleaning the vacuum cleaner
To clean the outside parts of the appliance use a fine cloth dipped in lukewarm
water. Do not use aggressive cleaning agents, paint thinners or solvents. Using these
solutions could damage the surface of the appliance.
TROUBLESHOOTING
Before you decide to contact an authorised service centre, please read through the
following table:
Problem Possible cause Solution
The motor will
not start
- The power cord is not
inserted correctly in the
power socket.
- The power socket is
damaged.
- The vacuum cleaner is not
switched on.
- Insert the plug firmly into
the power socket
- Inspect the power socket.
- Turn on the vacuum
cleaner.
Suction power
is weak
- The appliance is clogged.
- The dust filter needs
cleaning.
- The dust container is not
in the correct position.
- The filter is clogged.
- Remove the blockage or
foreign object.
- Clean out the dust filter.
- Close the dust container.
- Clean out the filter.
The power cord
is not wound in
completely.
The power cord may have
slipped down from the
winding pulley during
winding.
Hold the cable under
tension while winding
the cable.
The cable cannot
be pulled out.
The cable is wound up
incorrectly.
Press the winding button of
the self winding cable and
try to rewind the power
cord again
Suction power
control does not
work.
The appliance is out of
order.
Contact an authorised
service centre.
The power cord
starts to wind
in when it is not
required.
The winding mechanism is
damaged.
Contact an authorised
service centre.
The dust container
cannot be closed.
The dust filter is inserted
incorrectly or in an
incorrect position.
Reinstall and secure the
filter in position and try
again.
TECHNICAL SPECIFICATIONS
Rated voltage ................................................................................................................... 220 – 240 V~
Rated frequency......................................................................................................................50 / 60 Hz
Rated power input ....................................................................................................................... 750 W
Safety class (with regard to electrical shock protection) ......................................................... II
Noise level ................................................................................................................................... 75 dB(A)
Length of power cord ....................................................................................................................... 7 m
Operating range ............................................................................................................................. 10 m
Dust container capacity ..................................................................................................................... 1 l
Dimensions (length × width × height) .................................................... 380 × 280 × 255 mm
Weight ............................................................................................................................................ 2,57 kg
The declared noise emission level of the appliance is 75 dB(A), which represents alevel
Aof acoustic power with respect to areference acoustic power of 1 pW.
Changes to text and technical parameters reserved.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling, hand
these products over to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic devices, ask your retailer or supplier for
the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVC 1035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 1035 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info